628807

Gude 24314 Seite 8

8
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
Keep the handles dry and with no signs of oil and grease.
Be careful!
Pay attention to what you are doing. Use common sense
when working. Do not use the truck when you are tired.
Check the truck for any damage!
Faultless working of the protection components or slightly
damaged parts needs to be carefully checked before the
truck is used.
Check whether the moving components are working
perfectly and are not getting jammed or whether some
parts are not damaged.
All components must be installed correctly and meet all
conditions for ensuring faultless operation of the truck.
Protection components and parts that are damaged need
to be professionally repaired in a certified specialised shop
or replaced unless provided otherwise in the Operating
Instructions.
WARNING!
Use of other insertion tools or accessories may result in a
risk of injury for you.
Have any truck repairs executed by professionals!
This truck corresponds to applicable safety provisions.
Repairs may only be executed by an expert, using original
spare parts. Otherwise, the user faces a risk of injury.
Special safety instructions
WARNING!
- The truck driver must make sure there is nobody in
the danger area before putting the truck into
operation, before operating it or before lifting the fork.
The entire truck (especially wheels and forks) must
be checked for any damage.
- Do not leave the truck on slopes and lower the forks
to the full extent.
- In case of emergency, the truck can be braked by
lowering the load.
- Before putting the load on the fork, the driver must
make sure the load has been fitted on the pallet
properly and that the maximum carrying load will not
be exceeded.
Marking
Product safety:
Product corresponds to
appropriate European
Community standards
Using the truck as designated
The truck described in these Operating Instructions is a
warehouse transport mean designated for lifting and
transporting load.
It needs to be used, maintained and operated in
accordance with these Operating Instructions. Any other
use is not in accordance with its designation and may
cause injury to persons or damage to the truck or physical
property. In particular, it is necessary to avoid overloading
caused by too heavy or unbalanced load. The binding
details of the maximum load are included on the type label
on the truck. The warehouse transport mean cannot be
used in a fire-dangerous, explosive or dusty environment
or spaces causing corrosion.
The operator must make sure the truck is only used in
accordance with its designation to prevent all types of risk
that would put life or health of the user or any third person
at risk. The operator must make sure that all users have
read and understood these Operating Instructions.
If the instructions in this manual are not followed, the
warranty expires. The same applies if the customer or any
third party has executed any unauthorised work on the
subject of the warranty not approved by the manufacturer's
customer service.
Installation of additional equipment in or on the truck with
interventions in the function of the transport mean is only
allowed after a written consent of the manufacturer.
The driver is responsible for the truck when being used. No
other persons can be taken in the truck. Any damage or
other failures of this warehouse transport mean must
immediately be reported to supervising workers.
The operating worker must make sure load is in a proper
condition. Appropriately fitted loads can only be
transported. If there is a risk that some parts of the load
could tip over or fall down, adequate protective measures
must be taken.
Operation
Starting mechanism setting
On the handle (1), there is the starting/functional lever that
can be set to 3 positions.
LOWERING = fork lowering
NEUTRAL = load transport
LIFT = fork lifting
These positions have been factory-set.
If reset, you can set them back by taking these
following steps.
8
… 8 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gude 24314 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info