Bedienungsanleitung Gude Basic 8T-D 02025 (Seite 29 von 92) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

623630

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Technical Data

ENGLISH

Wilful holding or blocking of the switch, unless being

a neutral, will automatically lead to switch failure.

IThe warranty will not apply in such a case that must

naturally be checked.

• The machine meets the EN 61000-3-11 require-

ments and is subject to special connection condi-

tions. That means that a use on optional points of

connection is not allowed.

• The machine may cause temporary voltage uctua-

tion in adverse conditions.

• The machine has only been designed to be used on

points of connection not exceeding the maximum

allowable network impedance Zmax = 0.233 .

• As a user, you must make sure, after consultation

with your energy provider, if necessary, that your

point of connection on which the machine is to be

operated meets the requirements above.

Working area

For safe wood splitting, it is essential that the wor-

king area is at and slip-resistant and that a sucient

space for moving is provided. To take the wood

splitter to your home, it is necessary there are no

obstacles in the way, i.e. no risk of tripping. Adequate

lighting of the working area needs to be provided.

Work preparation

Before putting the machine into operation, working

of the safety guards (two-lever operation system, in

particular) must be checked.

• Put both control levers down and the splitter knife

down, app. 5 cm above the desk.

• One control lever to be released at all times, with

the splitter knife remaining in the selected position.

CAUTION! Whenever the machine is to be put into

operation, make sure the splitter desk is rmly and

safely tted to the machine.

operation

Power supply must be interrupted by pressing the

red button on the switch and unplugging the machi-

ne for any repair or servicing work or when leaving

the wood splitter. Turning to the O position is not

enough to interrupt the power supply.

Using the wood splitter may lead to some hazards.

Therefore, the machine may only be handled by

instructed and experienced persons. The operator

must wear close-tting clothing and safety shoes.

Make sure there are no persons in the

working area during operation or make

sure such persons keep a sucient

safety distance.

The wood splitter has been designed to

be operated by 1 person. The machine

must never be operated by two or more

persons.

Wood splitter being operated by two persons,

with one holding a piece of wood and the other

controlling the clamps is strictly prohibited.

Do not use this product in any other way as stated

for normal use. Not observing general regulations

in force and instructions from this manual does not

make the manufacturer liable for damages.

Safety Instructions

Electrical connection

WARNING! Electric shock! There is a risk of

an injury caused by electric shock!

Operation is only allowed with a safety

switch against stray current (RCD max. stray

current of 30mA).

Check the voltage. Technical data given on the type

label must correspond with electric network voltage.

Insert the plug of the electrical cable in a socket of

suitable shape, voltage and frequency complying

with current regulations.

Only for 400 volt machines: It is essential to respect

the engine rotation direction (see the arrow on the

engine) as operation in wrong direction would da-

mage the oil pump. Warranty claims cannot apply in

such a case. Change the rotation direction by turning

the connector polarity if necessary.

Pursuant to the provisions of „CE“ professional

associations, etc., all splitters are tted with an

undervoltage release in the switch. This will prevent

accidental repeated starting in case of current inter-

ruption due to power failure, accidental unplugging,

defective fuse, etc. The machine must necessarily be

turned on again by repeated pressing of the green

switch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude Basic 8T-D 02025 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info