Bedienungsanleitung Gude ECO WHEELER 1600 E 95122 (Seite 12 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

625891

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Commands:

Please read carefully the

Operating Instructions. Before

using the appliance, familiarise

carefully with the appliance

operational elements..

Use protective glasses and

head phones

Use protective gloves Use safety shoes

Environment protection:

Dispose waste professionally

so as not to harm the

environment.

Packing cardboard material

may be delivered to

collection centres for

recycling.

Any defective and/or disposed

electric or electronic

appliances must be delivered

to appropriate collection

centres.

Package:

Protect against moisture This side up

Interseroh-Recycling

Technical specifications:

Connection Engine power

Engine speed Cutting width

Grass catcher capacity Weight

Noise

Training

Please read carefully the Operating Instructions and the

servicing instructions. Familiarise thoroughly with the

controls and proper using of the appliance. You must know

how the appliance works and how the controls may quickly

be switched off.

Never let children work with the appliance. Never let an

adult person work with the appliance without proper

training.

Do not let any persons, especially small children and pets,

to the place of your work.

Be careful to prevent slipping of falling.

Use as designated

The ECO WHEELER 1600 E MOWER has been designed

to treat grass plots and lawns in private spaces.

Works other than those for which the appliance has been

designed and that are specified in the Operating

Instructions cannot be performed with this appliance.

Any other use is in conflict with the designation. The

manufacturer will not be liable for any consequential

damage and injuries. Please be sure to know that our

appliances have not been designed to be used for

industrial purposes.

Assembly

Fastening the handles

1. Insert the two posts in appropriate holes on the

mower and fasten them using two bolts (included

in the supply). (pic. 2)

2. Shift the cable pull relief equipment above the

arch handle and fasten it using the holding

clamps (included in the supply). (pic. 3)

3. Now fasten the arch handle to the bottom posts

using bolts and fly nuts (included in the supply).

(pic. 4)

4. Fasten the 2-point safety switch cable to the

arch handle and the post using two cable

clamps. (pic. 4)

2-point safety switch assembly (pic. 5)

1. Unscrew both bolts on the 2-point safety switch.

2. Spread slightly the 2-point safety switch braces,

shift the switch above the both holes in the arch

handle and screw the 2-point safety switch.

Assembly of wheels (pic. 6)

1. Fit the small front and big rear wheels, insert

washers and fasten the wheels using

appropriate nuts.

2. Now fit the wheel covers on the assembled

wheels.

Buffer assembly (pic. 7)

1. Insert the spring on the buffer in the mower hole.

2. Press the buffer carefully in the appropriate

fixtures on the mower.

Grass catcher assembly (pic. 9)

1. Assemble the grass catcher as shown in the

picture.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude ECO WHEELER 1600 E 95122 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info