Bedienungsanleitung Gude EM 1000 P 06016 (Seite 11 von 50) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

625875

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Commands:

Do not touch these parts to

avoid burns. Learn carefully

how the appliance works

before operating it.

Use protective glasses and

headphones.

Use protective gloves Use safety shoes

Environment protection:

Dispose waste professionally

so as not to harm the

environment.

Packing cardboard material

may be delivered to

collecting centres for

recycling.

Any faulty and/or disposed

electric or electronic devices

must be delivered to

appropriate collection centres.

Package:

Protect against moisture This side up

Interseroh-Recycling

Technical specifications:

Connection Engine output

Engine speed Cutting width

Grass catcher capacity Weight

Noise

Training

Please read carefully the Operating Instructions and the

servicing instructions. Familiarise thoroughly with the

controls and proper using of the appliance. You must know

how the appliance works and how controls can quickly be

switched off.

Never let children work with the appliance. Never let an

adult person work with the appliance without proper

training.

Do not let any persons, especially small children and pets,

to the place of your work.

Be careful to prevent slipping or falling.

Use as designated

The electric mower has been designed to treat grass plots

and lawns in private spaces.

The appliance cannot be used for other works than those

for which it has been designed and which are specified in

the Operating Instructions.

Any other use will be considered a use in conflict with the

designation. The manufacturer will not be liable for any

consequential damage and injuries. Please be sure to

know that the appliance has not been designed for

industrial purposes.

Assembly (pic. B)

Mounting the handles (pic. B/3,4)

1. Insert the bottom part of the handle or the two

bottom parts in appropriate holes on the mower

so that the bottom parts of the handle snapped

in, i.e. fasten them using two socket-head

screws and washers (included in the supply),

depending on the model.

2. Move the cable strain relief eye above the upper

part of the handle.

3. Now attach the upper part of the handle to the

bottom part of the handle using screws and fly

nuts (included in the supply).

4. Attach the appliance cable to the upper and

bottom part of the handle using cable clamps.

Assembly of wheels/cutting height adjusting (pic. B/5)

1. Depending on the required cutting height, fit the

small front and big rear wheels in appropriate

holes. The same cutting height score needs to

be used for every wheel.

Grass catcher assembly (pic. B/2)

1. Assemble the grass catcher as shown in picture

B/2.

Operation

Rotating knife

Works/adjustment on the appliance only to be performed

when the engine is off, the appliance unplugged and

cutting knife in an idle condition.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude EM 1000 P 06016 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info