Bedienungsanleitung Gude FP 600 PLUS 01869 (Seite 28 von 108) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

623624

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

ENGLISH

FP 600 PLUS I • FP 700 PLUS

Warning against dangerous electric

voltage

Warning against cutting injuries

DIN 847-1

Circular-saw blade according to DIN 847-1

Rotation direction

Any defective and/or disposed electric or

electronic devices must be delivered to

respective collection centres.

Remove all undesirable items, e.g. nails

and wire, before working

Do not press too much

Strong

Slow

General instructions for electric

tools

WARNING

Read all safety instructions and manuals. Failure to

follow the safety instructions and manuals may result

in electric shock, re and/or serious injuries.

Save all warnings and instructions for future

reference.

The term „electric tools“ used in the safety instruc-

tions refers to electricity-powered tools (including

electric cable) and battery-powered tools (without

electric cable).

1) Safety in the place of work

a) Keep the place of your work clean and well lit.

Mess or an unlit workplace may lead to injuries.

b) Do not work with electric tools in conditions

with ammable liquids, gases or dust. Electric

tools produce sparks able to ignite dust or fumes.

c) Keep children and other persons outside the

place where the electric tools are used. When

not concentrated, you may lose control over the

machine.

2) Electrical safety

a) The plug of an electric tool must strictly

correspond to the socket. The plug must not

be altered in any case. Do not use any adapters

together with earthed electric tools. Unaltered

plugs and appropriate sockets reduce the risk of

electric shock.

b) Prevent contact of your body with earthed

surfaces, such as tubes, heating, cookers and

fridges. There is an increased risk of electric shock

if your body is earthed.

c) Do not expose electric tools to rain and moisture.

Water entered in electric tools increases the risk of

electric shock.

d) Do not use the cable in conict with its designa-

tion, to carry or hang electric tools or to pull the

plug out of socket. Protect the cable against high

temperatures, oil, sharp edges or moving parts

of the machine. Damaged or entangled cables

increase the risk of electric shock.

e) When working with electric tools outdoors, use

extension cables suitable for outdoor use. Using

an extension cable suitable for outdoor use redu-

ces the risk of electric shock.

f) If operating electric tools in wet conditions can-

not be avoided, use a safety switch against stray

current. Using a safety switch against stray current

reduces the risk of electric shock.

3) Safety of persons

a) Be careful, pay attention to what you are doing

and use common sense when working with

electric tools. Do not use electric tools when you

are tired or under the inuence of drugs, alcohol

or pharmaceuticals. A moment if inattention when

using electric tools may lead to serious injuries.

b) Use personal protective equipment and protec-

tive glasses at all times. Using personal protective

equipment, such as the respirator, non-slip shoes,

protective helmet or ear protectors, depending on

the type and use of electric tools, reduces the risk

of injuries.

c) Prevent the machine from unintentional starting.

Before plugging and/or connecting the machine

to battery, handling or carrying, make sure the

electric tools are switched o. Having a nger on

the switch when carrying the electric tool or when

the machine is on when plugging it may lead to

injuries.

d) Before starting any electric tool, remove any

adjusting wrenches and screwdrivers. A tool or a

wrench present in the rotating part of the machine

may lead to injuries.

e) Avoid any abnormal body posture. Provide good

stability and keep balance at all times. By this,

electric tools are better controlled in unexpected

situations.

f) Wear appropriate clothing. Do not wear loose

clothing and jewels. Keep hair, clothing and glo-

ves out of rotating parts. Loose clothing, jewels

and long hair may get caught by moving parts.

g) If dust exhausters and catchers are to be

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude FP 600 PLUS 01869 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info