Bedienungsanleitung Gude GAB 8A 85060 (Seite 11 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628817

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

• When working with electrical installation, make sure

there is someone around who could help you in case

of emergency.

• To disconnect the appliance quickly from the power

supply, the outlet must be near the appliance and

easily accessible.

• Make sure the supply line and plug are dry before

putting the appliance into operation.

• Please be advised that some parts of the appliance

may remain under voltage even after activating the

protective device (fuse).

• Install the appliance in a dry place protected against

spraying water.

• Protect the devices against aggressive vapours and

moist air or salt-containing air.

• Protect the appliance and cables against rain and

moisture.

• Do not lay the cables over objects with sharp edges.

• Do not bend the cables at a sharp angle.

• Do not pull the cable.

• Ensure appropriate ventilation.

• A minimum distance of 20 cm from other objects

should be kept around the battery charger to all

directions.

• Keep all objects that may get damaged as a result of

high temperatures in a sufficient distance when the

charger is being operated.

•

Do not use the appliance in an environment

with inflammable gases, e.g. in bilges powered by

petrol or near propane tanks.

• The appliance must always be switched off after

being used.

• Never let the charger unattended during the charging

process!

• Charging batteries should solely be used.

• Boat batteries must in principle be charged outside

the boat.

•

Risk of injury! Batteries may contain an

aggressive and mordant acid. Prevent any contact of

your body with the liquid in the battery. Should you

get stained by the battery liquid, rinse thoroughly the

appropriate body part with water.

• Risk of explosion! Prevent metal objects from falling

on the battery. This could cause sparking and

consequently short circuit between the battery and

other parts of the wiring.

•

Risk of explosion! Make sure the polarity is

right when connecting: - red clip: positive terminal, -

black clip: negative terminal.

•

Wear protective goggles and clothes when

working with the battery.

• Do not touch your eyes when working with the

battery.

• Ensure stability! The appliance and the battery

charged must be positioned in a way they cannot turn

over or fall down.

• Follow the instructions of the manufacturer of the

battery, equipment or vehicle for which the battery is

used.

• Never try to charge frozen batteries.

•

Do not smoke and make sure there is no

sparking near the battery.

• If the battery needs to be removed, ground

connection must first be disconnected. Disconnect all

connections and appliances from the battery before

removing.

• Do not charge common batteries.

•

Caution! If pungent smell of gas is felt, there is

an acute risk of explosion. Switch the appliance off

and disconnect it from the power supply, ventilate

immediately and have both the appliance and battery

checked by a professional.

Use as designated

The automatic battery charger has been designed for

charging maintenance-free and maintenance starting

batteries of 12V/6V (lead accumulators) and gel batteries.

Any use beyond the above specification is in conflict with

the appliance designation. The manufacturer will not be

responsible for any damage incurred or injury caused by

failing to adhere to the above mentioned. Please be

advised that our appliances have not been designed to be

used for business purposes.

Putting the appliance into operation

Step 1

Unscrew or remove the battery plug (if any) from the

battery and make sure there is an appropriate acid level in

the charged battery.

It is necessary to follow instructions of the charged

battery manufacturer, especially as far as the acid level

and distilled water filling are concerned. Protective goggles

and gloves should always be worn for these works.

Step 2

First connect the battery clip not connected to the

chassis. The second connection is made with the body,

in a sufficient distance from the battery and petrol line.

The charger is then connected to the electrical network.

If you want to charge the battery outside the vehicle,

make sure there is the right polarity when connecting –

red clip: positive terminal, - black clip: negative terminal.

Step 3 (GAB 15A)

• Switch the appliance on by pressing the

“ON/OFF“ button.

• Depending on the type of the charged battery,

perform the settings described in the “Operating

elements“ section and using the buttons on the

display, choose the battery type and charging

current intensity.

Charging current

intensity selection

Battery capacity

2 6-20Ah

6 20 -40Ah

10 40-100Ah

15 50-200Ah

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GAB 8A 85060 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info