Bedienungsanleitung Gude GADH 254-230 V 55058 (Seite 37 von 108) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

624773

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

ENGLISH

The machine meets the EN 61000-3-11 requirements

and is subject to special connection conditions. That

means that a use on optional points of connection is

not allowed.

• The machine may cause temporary voltage uctu-

ation in adverse conditions.

•

The machine has only been designed to be

used on points of connection not exceeding the

maximum allowable network impedance Zmax

= 0.233 .

• As a user, you must make sure, after consultation

with your energy provider, if necessary, that your

point of connection on which the machine is to be

operated meets the requirements above.

Work preparation / operation

Provide adequate lighting or good lighting conditions

when working with the machine.

Before each use, check the following:

• Proper function of the on and o button, incl. the

emergency switch.

• Locked disconnected protective equipment

by gradual opening of every separating protective

equipmen

t to be able to turn the machine o and

checking that the machine cannot be turned on

whenever the protective equipment is open.

• Brake

by means of a function test to establish whether

the br

aking process takes place within the speci-

ed braking time and, if the machine is tted with

a mechanical brake, that the brake must be tested

each time the overload guard is tripped.

• Recoil risk

at least once per shift by a visual inspection to

establish tha

t they are in good working order,

for example, that the contact surface has not

been damaged by impacts and that the grabs

fall back without hindrance due to their own

weight.

• Planing blades

for signs of damage and to ensure they are positi-

oned correctly.

he machine may only be used if all these condi-

tions are satised.

se pusher wood or sticks which are in perfect condi-

tion for machining short workpieces.

onnect the machine to a dust and chip extractor.

• required air volume approx. 700-1000 m³/h

• Vacuum at every extractor connection port: 840 PA

• Cross-section of the connection port: 100mm

Check that the stop is secure before starting the

machining work.

Ensure that you can maintain your balance at all

times. Stand to the side of the machine. Whilst the

machine is running keep your hands at a safe distance

from the cutting roller and from the point at which

the chips are discharged.

Do not start the planing work until the cutting roller

has reached the required speed.

Only plane with sharp blades and never plane over

metal (nails and screws).

Also ensure that the workpiece does not contain any

cables, wires, cords or the like. Do not machine any

wood which has lots of knots or knot holes.

Secure long workpieces to prevent them tipping over

at the end of the planing process. Use roller stands,

for example, or similar devices for this purpose.

Removing sawdust and chippings from the machine

when running is strictly prohibited.

Switch o the machine immediately it is jams. Pull out

the mains plug and remove the jammed workpiece.

Set the smallest cutting size after use to prevent the

risk of injury.

Machine to be stored in locked spaces, out of reach

of children.

Maintenance

Unplug the machine before any work on it.

Prior to every use, visually check the machine to rule

out any defects, in particular on the power cable and

the plug.

The machine must not be used under any circum-

stances if the machine or the safety devices are

damaged

Repairs and works specied in these Instructions may

only be performed by qualied authorised sta.

Use only original accessories and original spare parts.

At all times, keep the machine, ventilation slots, in

particular, clean. The sawdust ejection and/or dust ex

hauster should be cleaned at regular intervals. Never

spr

ay water on the machine!

Only a regularly maintained and treated appliance

can serve as a satisfactory aid. Insucient mainte-

nance and care can lead to unforeseen accidents and

injur

ies.

Never clean the machine and its components with

solvents, ammable or toxic liquids. Us only a damp

cloth making.

Apply environment-friendly oil to all moving parts.

If necessary, a list of spare parts can be found at www.

guede.com.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GADH 254-230 V 55058 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info