Bedienungsanleitung Gude GDM 1000 11420 (Seite 11 von 29) (Deutsch, Englisch, Holländisch, Französisch)

624777

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

General Safety Instructions

Prior to the initial use of the unit, the operating instructions

should be read completely. If in doubt with regard to

connection and operation of the unit, consult the

manufacturer (servicing department).

FOLLOW THE INSTRUCTIONS BELOW CAREFULLY IN

ORDER TO SECURE A HIGH DEGREE OF SAFETY:

CAUTION!

• The unit shall always be fitted on the worktable

horizontally, safely and firmly.

• The workplace shall be kept clean and sufficiently lit.

• Never use the unit near easily flammable materials,

gases or liquids.

• Wear goggles, ear protectors and suitable protection

clothing. If necessary, use a breathing mask.

• Do not lean far forward.

Always take care that your posture is safe and avoid

losing your balance

• Do not overload the machine.

The machine operates better and safer under conditions

for which it was designed.

• Use proper tool.

Tools or auxiliary equipment should be used only for the

purpose for which they were intended.

• Always keep tools in good conditions.

• To achieve optimum results and ensure safety during

work it is essential to keep tools always sharp and

clean. It is necessary to meet instructions for lubrication

as well as for replacement of accessories.

• Make sure that your standing is stable when working

with the unit.

• Keep unauthorised persons, children in particular, away

from the working area.

• Keep the existing protection devices at places and

provide for their perfect functioning.

• Make sure that the power cable is not close to rotating

parts.

• Never leave the switched-on unit unattended. If you

depart from the unit, switch it off.

• If the unit is out of use, prior to maintenance/cleaning or

replacement of a tool, unplug it.

• After use, put away the adjusting key.

• Make sure that cleared for the setting tool used always,

before the machine is turned on.If the unit is out of use,

prior to maintenance/cleaning or replacement of a tool,

unplug it.

• Persons unable to operate the appliance due to their

physical, sensory or mental abilities or their

inexperience or lack of knowledge must not operate it.

• If the appliance or feeder cable show any sign of visible

damage the appliance must not be put into operation.

• If the feeder cable of the appliance is damaged it needs

to be replaced by the producer or an electrician.

• Repairs of the appliance can only be executed by an

electrician. There might be significant risks as a result of

unauthorised repairs.

• The same regulations apply for accessories.

Güde GmbH & Co. KG does not answer for damages

caused by:

• Appliance damage by mechanical influences and

overloading.

• Any changes to the appliance.

• Use for any other purpose than that described in the

Operating Instructions.

• Unconditionally follow all safety instructions to prevent

accidents and damage.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and

summon qualified medical attendance as quickly as possible.

Protect the injured person from further harm and calm them

down.

For the sake of eventual accident, in accordance with

DIN 13164, a workplace has to be fitted with a first-aid kit.

It is essential to replace any used material in the first-aid

kit immediately after it has been used.

If you seek help,

state the following pieces of information:

5. Accident site

6. Accident type

7. Number of injured persons

8. Injury type(s)

Disposal

The disposal instructions are based on icons placed on the

appliance or its package. The description of the meanings

can be found in the “Marking” chapter.

Operating staff requirements

The operator must carefully read the Operating Instructions

before using the appliance.

Qualification

No special qualification is necessary for using the appliance

apart from detailed instruction by a qualified person.

Minimum age

The appliance may only be operated by persons over 16

years of age. An exception includes youngsters operating

the appliance within their professional education to achieve

necessary skills under teacher's supervision.

Training

Using the appliance only requires appropriate instructions by

a professional or reading the Operating Instructions. No

special training necessary.

Technical data

Connection 230 V

Frequency: 50 Hz

Motor power P1: 550 W

Max. turning length: 935 mm

Point height: 140 mm

Point wide: 600 - 2100 rev/min

-1

Turning diameter: Max. 280 mm

Weight: 70,5 kg

Transportation and Storage

The unit has been designed for stationary use.

Units out of use should be stored in a dry locked room.

Inspection and Maintenance Safety Instructions

The machine will serve as a sufficient aid only if maintained

and care for appropriately. Insufficient maintenance and care

may result in accidents and injuries.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GDM 1000 11420 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info