622222
9
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
Introduction
To enjoy your new machine as long as possible, please read
carefully the Operating Instructions and the attached safety
instructions before using it. Further, we recommend keeping
the Operating Instructions to recall the product features in the
future.
Within the continuous product development, we reserve
the right to make technical changes to improve it.
Any reprints, even partial, are subject to approval.
This document represents translation of the original
Operating Instructions.
Device description
Body of steel sheet with powder coat and integrated heat
overloading protection.
Pic. 1
1. welding machine
2. welder´s sheet
3. casters 2x
4. wheel axis
5. transparent screen
6. tinted welder scresn
7. welder shoeld holder
8. foot
9. handle extenmsion ti
10. carrying handle
11. slag hammer-brush
12. fixinf assembly
Technical Data
Electrode Welder GE 185 F #20004
Voltage/frequency: 230 V/400 V~50 Hz
Protection: 16 A
Controlled scope: 40-170
Max. input: 6,8/14,1 kVA
Material recommended thickness: 1,5-10 mm
Idle run voltage: 48 V
Protection type: IP 21 S
Weight: 21,7 kg
Use as designated
The GE 185 F electrode welding machine is suitable for light
electrode welding and smaller material thickness up to 4 mm.
The welding machine is not suitable for industrial purposes.
Warning!
Use the welding machine never to defrost tubes!
The machine cannot be used for works other than for which
the machine has been designed and that are specified in the
Operating Instructions.
Any other use is a use in conflict with the designation. The
manufacturer will not be liable for any consequential damage
and injuries. Please be sure to know that the machine has not
been designed for industrial purposes.
Operator requirements
The operator must carefully read the Operating Instructions
before using the machine.
Qualification
No special qualification is necessary for using the machine
apart from detailed instruction by an expert.
Minimum age
The machine can only be operated by persons over 18 years
of age. An exception includes youngsters operating the
machine within their professional education to achieve
necessary skills under trainer's supervision.
Training
Using the machine only requires appropriate instructions by a
professional or reading the Operating Instructions. No special
training necessary.
Important basic safety instructions
Before you start working with the appliance please read
carefully the following safety regulations and Operating
Instructions. If any other person is to handle the appliance
provide him/her with the Operating Instructions. Keep the
Operating Instructions for future reference!
Package: The appliance has been put in a package to
prevent any damage during transport. Packages are raw
materials so they can be reused or recycled.
Please read carefully the Operating Instructions and follow
them. Use these Operating Instructions to get acquainted
with the appliance, its corresponding use and safety
instructions. Keep the Instructions for future reference.
The cable reel can only be operated by persons who
have thoroughly read and understood these Operating
Instructions. The cable reel must not be operated by
persons not sufficiently instructed or not in a good
health state.
Inspect the appliance visually before each use. Do not
use the appliance if any safety device is damaged or
worn out. Never remove any safety device.
Use the appliance only for the purpose specified in
these Operating Instructions.
Be always careful when working. Watch your activity.
Proceed carefully. Do not use the cable reel if you are
not concentrated.
Safety in the workplace is your responsibility.
Never leave the appliance unattended.
Put the appliance to a safe place if you need to
interrupt your work.
Do not use the appliance when raining or in a humid or
wet environment
Never spray water on the cable reel or submerge it to
any liquid.
Do not use electric tools near flammable liquids or
gases.
Do not switch the appliance on if turned over or not in
the operating position.
Keep the appliance out of reach of other persons,
especially children and pets.
Do not let other persons touch the appliance or cable.
After you finish working with the appliance, pull the
plug out of socket and check if the appliance is not
damaged.
If the appliance is not used store it to a dry place
inaccessible to children.
The system voltage must correspond to the voltage
specified on the type label.
Any repairs can only be executed by an electrician.
Before putting the appliance into operation and after
any impact check it for any wear-out or damage and
have necessary repairs executed.
Never use spare parts and accessories not
recommended by the producer.
Use the appliance only in broad daylight or under
sufficient artificial lighting.
9
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

gude-ge-185-f---20004

Suche zurücksetzen

  • wenn ich mein schweissgerät an Strom anschliesse, funktioniert nicht Eingereicht am 20-6-2020 11:56

    Antworten Frage melden
  • Hat jemand einen Schaltplan für die Anschlußbelegung des Paketschalters? Eingereicht am 29-11-2018 15:17

    Antworten Frage melden
  • warum rappelt gerät nach kurzer einschaltzeit und überlastungsschutz leuchtet Eingereicht am 6-7-2018 13:16

    Antworten Frage melden
  • Bitte die Anschlußbelegüng von Paketschalter 220v 400v darstellen Eingereicht am 10-7-2017 10:39

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gude GE 185 F - 20004 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info