Bedienungsanleitung Gude GFR 140 94312 (Seite 16 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

627764

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ENGLISH

4) Power tool use and care

a) Do not force the power tool. Use the correct po-

wer tool for your application. Thecorrect power

ool will do the job better and safer at the rate for

which it was designed.

b) Do not use the power tool if the switch does not

turn it on and o. Any power toolthat cannot be

controlled with the switch is dangerous and must

be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from thepower tool

before making any adjustments, changing

accessories, or storingpower tools. Such pre-

ventive safety measures reduce the risk of starting

the po

wertool accidentally.

d) Store idle power tools out of the reach of child-

ren and do not allow personsunfamiliar with

the p

ower tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

e) Maintain power tools. Check for misalignment or

binding of moving parts,breakage of parts and

any other condition that may aect the power

tool’soperation. If damaged, have the power

tool repaired before use. Many accidentsare

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharpcutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with theseinstructions,

taking into account the working conditions and

the work to beperformed. Use of the power

tool for operations dierent from those intended

couldresult in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualied

repair person using only identicalreplacement

parts. This will ensure that the safety of the power

tool is maintained.

Additional Safety and Working

Instructions

Brushes must not be tted to machines whose speed

exceeds the maximum permitted brush speed.

Do not use damaged brushes.

Rust discoloration or other signs of chemical or

mechanical change to the brush material can cause

premature failure of the brush.

Bushes must be stored in suitable stands, containers

or boxes in such a way that they are protected from

the following eects:

• High air humidity, heat, water or other uids that

could cause damage to the brush

• Acids or acidic fumes that could cause damage

• Temperatures that are so low that they could cause

condensation to form on the brushes when taken

out of storage into an area with higher tempera

tures

•

Deformation of any part of the brush

Mains Connection

Operation is only allowed with a safety

switch against stray current (RCD max. stray

current of 30mA).

Connect only to single-phase AC system voltage as

indicated on the rating plate. It is also possible to

connect to sockets without an earthing contact as

the design conforms to safety class II. Only plug-in

when machine is switched o.

Maintenance

Unplug the machine before any work on it.

The appliance must not be used if damaged or safety

equipment is defective. Replace any worn-out and

damaged parts.

Caution! If the power cord of the appliance gets

damaged, it must be replaced by the manufacturer

or its customer service or a similarly qualied person

to avoid danger.

Repairs and works specied in these Instructions may

only be performed by qualied authorised sta.

Use only original accessories and original spare parts.

Keep the device, in particular the air vents, clean at all

times. Never spray water on the device body!

Do not clean the plastics with solvents, ammable or

toxic uids. For cleaning, use a damp cloth only.

Apply environment-friendly oil to all moving parts.

Only a regularly maintained and treated appliance

can serve as a satisfactory aid. Insucient mainte

nance and care can lead to unforeseen accidents and

injur

ies.

If necessary, a list of spare parts can be found at www.

guede.com.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GFR 140 94312 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info