Bedienungsanleitung Gude GFS 4000 INOX 94606 (Seite 8 von 67) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628256

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

Appliance

Horizontal suction pump. Ideal pump for pumping water from

tanks and rooms. Enables water level drop down to 15 mm

above the ground.

Volume of supply and appliance specification (picture A)

1. Carrying handle

2. Pump connection

3. Feeder cable

4. Foot

5. Pump connection throat

6. Floating switch

7. Pump body

Use as designated

The pump has exclusively been designed for water supplies

in homes, in the garden, in the yard and agriculture. The

manufacturer cannot be held liable for any damage if

provisions of generally applicable regulations and these

Operating Instructions are not followed.

The Operating Instructions must be read thoroughly before

using the appliance for the first time. If there are any doubts

regarding the appliance connection and operation, please

contact the manufacturer.

Warranty

Guarantee claims as per guarantee card attached.

GÜDE cannot be held responsible for damages incurred in

consequence of unqualified installation or unskilled handling

of the pump.

The device has to be checked on a regular basis to ensure

perfect functioning.

Every time the pump is to be put into operation, it must be

visually checked for any damage (on the electric cable and

plug, in particular). Using a damaged pump is strictly

prohibited.

General Safety Instruction

FOLLOW THE INSTRUCTIONS BELOW CAREFULLY IN

ORDER TO SECURE A HIGH DEGREE OF SAFETY:

Read and understand the operating instructions before

using the appliance. Abide by all the safety measures stated

in the service manual. Act responsibly toward third parties.

The pump is not suited for long-run operation (e.g. as

a circulation pump in ponds or streams). When used in

this manner, its service life is curtailed correspondingly.

In these cases, then, use a time switch to secure

sufficient idle periods between cycles of operation.

Do not leave the pump unattended while in operation

in order to prevent subsequent damages caused by

eventual malfunctions. Make sure to disconnect the

device from the grid if you do not plan on using it.

The pump must not be connected to the existing

water-supply network as a pressure-boosting device.

Do not let the pump unattended to prevent any

damage as a result of any malfunction. Unplug the pump

if not being used.

Caution: Operation is only allowed with a safety

switch against stray current (max. stray current of 30 mA

according to VDE regulation, part 702). Please ask

your electrician.

Caution: In any case, the pump must not be operated

without fills.

• The user is responsible to third persons in respect of

using the pump (waterwork, etc.).

• To be used on connection with a safety switch against

stray current (FI) only!

• Before putting the appliance into operation, a competent

electrician must check whether the required electrical

safety measures are in place.

• Electrical connection to a socket.

• Check the voltage. Technical data given on the type label

must correspond with electric network voltage.

• If the pump is used in ponds, wells, etc. and appropriate

waterworks, standards applicable for the use of pumps in the

given country must necessarily be met.

• Pumps used outdoors (e.g. ponds, etc.) must be fitted with

a H07RNF type rubber connecting cable according to DIN

57282 or DIN 57245 standards.

•

When the pump is being operated, no people or

animals may be present in the liquid or plunged in the

liquid (e.g. pools, cellars, etc.) .

•

The pumped liquid temperature must not exceed +35°C.

If an extension cable is used, such cable must be out of

H07RNF type rubber according to DIN 57282 or DIN

57245 standards. Never touch, lift or carry by cable a

pump that is plugged. It is necessary to make sure the

connecting socket is away from water and moisture and

that the plug is protected against moisture.

• Before putting the pump into operation, check whether

the electric cable and/or socket are not damaged.

• Unplug the pump before any work on it.

• Never touch, lift or carry by cable a pump that is

plugged! (pic. E)

• To prevent or avoid any damage (e.g. flooded

rooms, etc.) as a result of defective operation of the

pump (failures or defects), the owner (user) is

obliged to take reasonable safety measures (alarm

installation, reserve pump, etc.).

• If the pump is defective, a repair may only be executed

by authorised service staff. Original spare parts to be

used only.

• We would like to inform you that according to

applicable standards we do not take any

responsibility for a damage potentially caused by

our appliances in the following cases:

• Unauthorised repairs executed by unauthorised

service staff;

• Use in conflict with the designation or more

precisely, a failure to meet the use as designated

provisions;

• Pump overloading by continuous operation;

• Damage as a result of frost and other defects

caused by weather conditions;

The same regulations apply to accessory parts.

•

It is absolutely necessary to contact an

electrician in case of any damage to the

appliance feeder cable. Do not execute any

repair with your hands under any

circumstances.

•

This appliance has not been designed to

be used by persons (including children) with

any physical, sensory or mental limitation.

Persons with insufficient experience or

knowledge of the appliance are also

prohibited to work with the appliance.

Never let any unauthorised persons, children, in

particular, get near the appliance when they are not

supervised. At all times, keep children and unauthorised

persons out of reach of the appliance.

Gude GFS 4000 INOX 94606 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info