Bedienungsanleitung Gude GH 2800 94375 (Seite 13 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

627491

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Any other use contradicts to the intended use.

Manufacturer is not responsible for subsequent damage

and injuries. Please note the appliance is intended for

domestic use only.

Assembly GH 2800 #94375 (Fig. F/G)

Attention! Turn off and unplug the appliance before

maintenance, cleaning and assembly. The same

procedure applies to damaged, cut or tangled cable.

Keep power supply voltage: power supply voltage must

correspond to data on the appliance product label.

Small conductor size of the extension cable significantly

reduces power output of the appliance. For cables up to 25

metres, minimum cross section is 3 x 1.5mm², for cables

over 25 metres, minimum cross section is 2.5mm².

Attention! The extension cables not corresponding to the

requirements must not be used. The extension cable, plug

and socket must be water-proof and approved for outdoor

application.

Cable connections must be dry and must not rest on

ground.

If a cable drum is used, it must be unreeled.

For GH 2800 P #94375, proceed as follows:

(Fig. F, G)

 Unpack the appliance (Fig. F/2 and F/3)

 Take the collection box and attach legs to the

appliance (Fig. F/4 and F/5)

 Attach the carriage and transport wheels (Fig.

F/6 and F/7).

 Put the appliance body on the base (Fig. G/8)

(adhere to Fig. G/8-1 and G/8-2 ).

 Now, attach the appliance to the base. (Fig. G/9)

 Put the collection box under the appliance (Fig.

G/10) and secure by the collection box clamping

lever (G/10-1 a G/10-2). Attention! The

appliance does not operate without clamping!

Operation

Always put the appliance on solid and leveled surface. Do

never tilt or move the appliance if it is on and running.

Attention! The engine runs down after turning off.

Remove soil from the root balls and avoid penetration of

foreign objects such as stones, glass, metals, plastic

materials or textiles in the filling hopper and thereby to the

appliance, cutting roll; the appliance may get damaged.

The filling hopper must be empty.

Turning on

Press green Start pushbutton (Fig. A/3) or

(Fig. E/2)

Turning off

Press red Stop pushbutton (Fig. A/3) or

(Fig. E/2)

Safety feature against repeated running up

The safety feature against repeated running up prevents

sudden engine start after power supply failure.

Reverse operation

Press and hold the reverse operation button (Fig. A/4),

(Fig. A/4a) and depending on your model, press also

green Start button (Fig. A/3) or (Fig. E/2), the cutting roll

then rotates in reverse direction and releases the clogged

material.

Overload safety feature

If the appliance is exposed to excessive load (e.g. clogging

of cutting roll), the appliance halts after several seconds.

Work instructions

Material supply

Insert the shredded material only, the rotating cutting roll

will draw it in automatically.

 Insert such quantity of material not to clog

the hopper.

 Do not shred soft waste without solid

consistency but compost it directly.

 Make sure the shredded material exits to the

collection box or bag without any

restrictions - danger of clogging!

 Best results are achieved if you shred fresh

branches shortly after cutting.

Adjustment of pressure plate

The pressure plate is calibrated by the manufacturer and

requires no adjustment before first commissioning.

Adjustment of the pressure plate is required in case of

wear, e.g. when the branches wedge in chain each other

and they can not be shredded correctly.

In this case proceed as follows:

Turn the engine on and slowly rotate the adjustment knob

(Fig. A/9 or Fig. E/6) or Fig. H/13 clockwise to hear slight

friction. The cutting roll sharpens the pressure plate to

correct distance. Adjust the plate so that it is not worn too

early.

Identification

Product safety:

The product complies with

relevant EU standards

Prohibitions:

No pulling the plug!

Protect against rain and

moisture!

Warning:

Warning/caution

Caution! Dangerous electric

voltage!

Caution! Hurled objects!

WARNING! Rotating

appliance poses the risk of

injury!

Not suitable for indoor use

Keep bystanders in safe

distance from the

appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GH 2800 94375 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info