Bedienungsanleitung Gude GH 9 E 85104 (Seite 10 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628928

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Qualification

No special qualification is necessary for using the appliance

apart from detailed instruction by an expert.

Minimum age

The appliance can only be operated by persons over 16 years

of age. An exception includes youngsters operating the

appliance within their professional education to achieve

necessary skills under trainer's supervision.

Training

Using the appliance only requires appropriate instructions by

a professional or reading the Operating Instructions. No

special training necessary.

Technical specifications

GH 9 E Electric Heater

Voltage: 400 V

Frequency/protection type: 50 Hz/IP 44

Max. heating output: 9 kW (7700 kcal./h)

Heating levels: 4,5 kW/9 kW/ Fan

Input: 13 A

Fan output: 780 m

Weight app. 13 kg

Art. No. 85104

Transport and storage

The appliance may be transported using the travel

handle.

Appliances not being used should be kept in a dry

and locked room.

Operation (pic. 2 + 3)

The appliance may be put into operation after reading and

understanding the general safety instructions and

appliance-specific safety instructions. In doing so, proceed

as follows:

To reach optimum heat distribution, put the electric heater in

the middle of the room if possible or at least 1 m from the

wall. With this, air will circulate better and the room will get

warm quicker. All windows and doors must remain closed.

Connection (pic. 2):

Put the feeder cable to a suitable outlet.

Make sure your electrical network is protected

appropriately.

Operation (pic. 3):

Use the thermostat regulator and set the required

switch-off temperature.

The function switch has 4 switch levels

= off

= ventilation

= half heating output

= full heating output

To switch the electric heater off, let the function button in the

"Fan" position for app. 3-5 minutes. The appliance may then

be switched off or unplugged.

Never unplug the appliance when hot – let it cool down

first. The fan may still ventilate even when in the off position.

Power consumption corresponds to the sum of the heating

output (kw) and fan output.

Thermostat setting

Set the thermostat to the average switch-off

temperature.

Set the electric heater to the full heating output and let it

heat until the thermostat switches off. - until you hear

“snapping in”.

After reaching the set temperature, the heating spiral

switches off and the fan keeps running to circulate the

air. As soon as the temperature drops, the heating spiral

switches on again.

If the room temperature is too low, turn the thermostat

regulator more to the right and switch the heater on

again.

If the room temperature is too high, turn the thermostat

more to the left and let the room get cooler.

Keep repeating these steps until reaching the required

switch-off temperature.

Attention: For the first commissioning of the electrical

heater, it can sometimes be an unpleasant odor which

is completely harmless and completely disappears with

increasing operating time.



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GH 9 E 85104 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info