Bedienungsanleitung Gude GKM 6.5 ECO (Seite 19 von 49) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628645

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

Storing

If the sweeper has not been used for a long time, the following

steps need to be taken:

• thorough cleaning and repair of damaged varnish

• lubricating of spots that need lubrication and sweeper run

for 1 – 2 minutes

• applying anti-corrosive oil on the sweeping brush and

chassis.

Putting the sweeper out of operation and storing

Do not transport the sweeper, put it out of operation and store

when tilted forward, backward or sideways.

Do not store the sweeper in damp rooms, in rooms where

fertilizers are stored, in stables or near them. Tilting may cause

the engine oil to get to the combustion space, which in

consequence may bring problems wit starting and oil

carbonization – risk of strong corrosion formation.

Troubleshooting

Have all problems on your sweeper requiring major interference removed in your authorised shop. Any unauthorised interference may

cause damage. If problems cannot be removed by the described measures, you must quickly contact your authorised shop.

Failure

Cause

Measure

Engine not starting

Engine switch not in “I“ position (ON)

Fuel tap closed

Choke lever open

Socket plug not fitted

Spark plug dirty or faulty

Incorrect spark plug electrodes distance

Fuel tank empty

Old fuel

Put the engine switch to “I“ position

Open the fuel tap

Close the choke lever

Fit the socket plug

Clean or replace the spark plug

Set the electrodes distance to 0.7 – 0.8 mm

Add fuel

Replace old fuel with new one

Engine switching off

after being started

Air filter dirty

Too big distance of spark plug electrodes

Spark plug dirty or faulty

Clean the air filter

Set the electrodes distance to 0.7 – 0.8 mm

Clean or replace the spark plug

Engine failing

Socket plug or cable released

Fuel screen dirty

Air hole in the tank lid blocked

Air filter dirty

Old fuel

Fix the socket plug firmly on the spark plug

Fix the spark plug cable

Clean the fuel screen

Change the tank lid

Clean the air filter

Replace old fuel with new one

Engine failing in high

revolutions

Too small distance of spark plug electrodes

Set the electrodes distance to 0.7 – 0.8 mm

Engine with too low

output

Air filter dirty

Sweeping brush blocked by foreign items

Clean the air filter

Remove foreign items off the sweeping brush

Engine getting too

much heated

Cooling air system blocked

Too little of engine oil

Air filter dirty

Clean the ventilation louvers and cooling fins

Add engine oil

Clean the air filter

Sweeping brush not

working

Sweeping brush blocked with foreign items

Bowden cable set too freely

Remove foreign items and check whether the sweeping

brush is not damaged

Set the Bowden cable

Sweeping depth too

small

Sweeping brush setting too small

Worn-out brushes

Set the sweeping brush

Replace the brushes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GKM 6.5 ECO Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info