624577
25
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
D
21
D
D
GB
ENGLISH
Technical Data
Mitresaw GKS 190 GKS 210 A
Art. No 54993 54997
Service connection 230 V~50Hz 230 V~50Hz
Rated input 800 W S1 1200 W S1
No-load speed 5500 min
-1
5200 min
-1
Saw blade dia. x hole dia 190 x 30 mm 24 Z 120 x 30 mm 24 Z
Max. Cutting depth at
Mitre 0°/ Bevel 0°
Mitre 45°/ Bevel 0°
Mitre 0°/ Bevel 45°
Mitre 45°/ Bevel 45°
45 x 110 mm
45 x 80 mm
15 x 110mm
15 x 80mm
55 x 120 mm
38 x 120 mm
55 x 85 mm
38 x 85 mm
Inner diameter – suction nozzles 35 mm 35 mm
Weight 4 kg 4,8 kg
Noise details
Sound pressure level L
pA
90,8 dB (A) 90,8 dB (A)
Sound power level L
WA
104 dB (A) 104 dB (A)
Measured according to EN 61029; Uncertainty K = 3 dB (A)
Wear ear protectors!
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only workon the
appliance.An exception includes youngsters trained
in order to reachknowledge under supervision
of the trainer duringoccupational education.
In case of any doubts about connection and operati
-
on refer please to our customer center
Specied Conditions Of Use
The mitre saw can be used for sawing solid wood,
bonded wood, glued veneer, materials similar to
wood, aluminium proles, Non-ferrous metals and
plastics.
Stock having a round or irregular cross section (such
as rewood) must not be cut, as it can not be securely
held during cutting. When sawing thin stock layed on
edge, a suitable auxilary fence must be used for rm
support.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
It is strictly prohibited to disassemble, modify
and purposely remove the protective equipment on
the unit and t other protective equipment instead.
Even when the device is used properly and all safety
regulations are complied with, there still may be
some residual risks.
• noise emissions
• dust emissions
• vibrations to hand and arms
• Danger of burns
Tool and workpiece heat up during operation.
Risk of injury
Sharp tools and workpiece edges
Emergency procedure
Conduct a rst-aid procedure adequate to the injury
and summon qualied medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help,state the
following pieces ofinformation: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Gehrungskappsaege_54993_54997_1-0.indd 21 23.07.15 11:56
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gude GKS 210 A 54997 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info