Bedienungsanleitung Gude GL 200 (Seite 6 von 18) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

624843

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

General Safety Instructions

Before you work with the product, please read the following

safety instructions and the operating manual carefully

through. If you hand over this product to other people,

please provide them also with the operating manual. Keep

the operating manual always safe!

Packing: Your product is located in a packing for the

protection against transport damage. Packings are raw

material and therefore can be recycled or be restored into

the raw material cycle.

Please read the user manual carefully through and follow

the instructions there. Familiarize yourself with the product,

the proper use as well as the safety instructions on the basis

of the user manual. Please keep these instructions safe for

future reference.

1. Please read thoroughly the Operating Instruction before

putting the laminate cutter into operation. All the

operating staff must be informed of safety regulations

concerning the appliance use.

2. Do not use the laminate cutter if you are tired, impaired,

intoxicated or have consumed drugs.

3. Always wear safety goggles, safety gloves and safety

shoes.

4. Make sure you can move your hands freely on the

device, so you can work safely.

5. Keep your workplace clean and tidy at all times and

ensure proper lighting. Chaos and work in dark can

cause injuries.

6. Secure the rotating lever when not using the device or

while transporting it.

7. Always keep your hands out of reach of the cutting area.

It could lead to serious injuries or amputation of limbs.

Behavior in case of emergency

Perform necessary first aid measures according to the injury

and call for medical attendance as soon as possible.

Prevent the injured against any further injuries and calm him

down.

Disposal

The hints over disposal result from the pictograms which are

applied on the product and the packing. A description of each

pictogram can be found in the chapter “markings on the

product“.

Requirements for the operator

The operator should have read the operating manual carefully

before using the product.

Qualification

Besides a detailed training through a skilled staff, no special

qualification for the use of the product is necessary.

Minimum age

The product may not be operated by people, who are less

than 16 years old.

The use by young people forms an exception, if the operation

takes place during a vocational training to achieve the skill

and under supervision through a trainer.

Training

The use of the product requires only a corresponding training

through a skilled staff or on the basis of the operating manual.

A special training is not necessary.

Operation

Make sure the Laminate cutter is positioned properly and

cannot be tipped over.

Instructions step by step

1. Mark a line in the place where the workpiece is to be cut.

2. Insert the workpiece in the laminate cutter and place the

cutting edge on the line with the lever being partially

pressed down.

3. Press the lever down with constant pressure.

4. Laminate is cut effortlessly and cleanly along the line

marked by you due to the extra long lever.

5. Place the workpiece cleanly to the stop and cut in the

required place at rectangular cuts!

Maintenance and protection

All service and repair works can be done by skilled

professionals only.

- Regularly remove dust and cuttings from the appliance.

- Grease the mechanical parts by suitable lubricant

Knife grinding:

The blade of the laminate cutter is made of wear-free

material. Due to its special shape, the cutting blade must

not be ground or sharpened.

Malfunction – reasons - elimination

Malfunction Possible reasons Elimination

The handle cannot

be moved neither

up nor down.

Look for bits of

stones on the

splitter.

Remove the bits of

stones using a

brush or by

blowing.

Workpiece is not

standing on

upholstered

supports evenly.

There can be small

bits of stones on

the upholstered

supports.

Clean up the

upholstered

supports and lower

part of the splitter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GL 200 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info