Bedienungsanleitung Gude GRP 2500 (Seite 31 von 37) (Deutsch, Englisch)

625851

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

1. Pay attention to the conditions of the area, which you’re working in. After the engine is started, power machine will produce

poisonous flue gas. The gas may be invisible and odourless. Hence never work with the machine closed or poorly ventilated areas.

Provide for good lighting when cutting. Provide for stability when cutting in wet, snow or icy weather conditions on slopes or rough

ground.

2. Do not let any unauthorised persons approach the machine. The visitors and viewers, primarily the children, the ill and infirm

persons should not have any access to the working area. Prevent other persons from any contact with the machine.

3. Always use a correct tool for the job to be done. E.g. avoid using small tools and accessories for work that should be actually

done with a heavy tool. Use the tools only for the purposes they were designed for.

4. Pay attention to adequate clothing. The clothing should fit the purpose and should not put any limits to you when working

5. Use personal protection equipment. Wear safety shoes with steel toes and antiskid or rough sole.

6. Wear goggles. Object may be thrown against you.

7. Wear ear protectors. Wear personal protective equipment to protect your ears, such as ear protectors

8. Hand protection. Wear hard gloves – gloves of chrome tanned side leather give a good protection

9. Be attentive any time. Mind what you are doing. Use common sense. Do not use the tiller when tired. Never work with the

crusher when influence by alcohol, drugs or medicaments affecting the concentration capability..

10. Refuelling. Always switch the engine off before refuelling. Open the tank closure carefully for overpressure run out slowly and the

fuel ejaculation be prevented. When working with the tiller, the unit body temperature increases. Let the unit cool down before

refuelling. Otherwise, the fuel could ignite and persons get burnt. Beware of overfilling the tank. If there is a spill, remove it and

clean the unit. After finishing the refuelling, make sure the screwed closure is tight to avoid loosening in result of vibrations.

11. Period of Use and Breaks . Any prolonged use of an engine unit and its vibrations may result in impaired blood circulation of

hands. However, the time of using may be made longer by wearing suitable gloves or making regular breaks. Mind that personal

inclinations to poor blood circulation, cold outside temperatures or the power exerted on holding the unit will shorten the period of

use. .

12. Watch out for any damaged parts. Inspect the machine before use. Are any parts damaged? Ask yourself seriously when

detecting slight damage whether the machine will work perfectly and safely despite that. Watch out for proper aligning and

adjustment of any moving parts. Do the parts fit one in another properly? Are the part damaged? Is everything installed as

appropriate? Are any other prerequisites of proper working in place? Damaged protective devices etc. must be repaired or

replaced by authorised entities unless the operation manual expressly says otherwise. Any defective switches must be replaced at

an authorised servicing centre. Do not use the machine if it cannot be put on an

d off

with the switch. When repairs are necessary,

kindly turn to your local servicing centre.

13. Always switch the engine odd before set-up or maintenance .

14. Use approved components only. Use genuine spare parts for maintenance and repairs; these may be got in authorised

servicing centres.

Warning! Use of parts other than those recommended for use may cause a personal risk and damage of property .

The machine should be used for the assigned purpose only. Any other use shall be considered incompetent. Only the user, not in any

case the manufacturer, shall be held liable for personal injuries and damage of property resulting from incompetent use of the machine.

The manufacturer shall not be held liable for damages resulting from alterations made on the machine or from unskilled handling the

machine.

Device-specific safety instructions

• provide combustion during operation and refueling at a particular risk; Always the warnings in the manual of the engine and the

safety instructions below and read note. Otherwise, there can be serious or even fatal injuries.

• The machine is NOT in indoor or enclosed areas, such as a deep ditch, running, unless there is adequate ventilation by exhaust

fans or hoses. Engine exhaust contains poisonous carbon monoxide; einerkohlenmonoxydhaltigen stay in the environment may

lead to unconsciousness and death.

• During operation of the machine does not smoke.

• When refueling the machine does not smoke.

• DO NOT refuel when the engine is running or still hot.

• The machine is NOT in the vicinity of an open flame refuel.

• When refueling the machine NO fuel spillage.

• The machine is NOT in the vicinity of open flames operate.

• The fuel tank ALWAYS in a well ventilated area thoroughly.

• After refueling ALWAYS the tank cap.

• ALWAYS fuel line and tank to crack and leak check, and the device under such damages are not in operation.

• Poorly maintained machines may be a danger! Only regularly and properly maintained and repaired when necessary skill

machines over long periods of time safely and properly operated.

• The machine NOT in running condition clean, maintain or adjust. Rotating parts can cause serious injuries.

• A flooded Petrol NOT boost, as long as the spark plug is removed. The pent-cylinder fuel injected from the spark plug hole out.

• NO Zündfunkentest to make gasoline engines when the engine is flooded or gasoline is to smell. A stray spark could ignite the

vapors.

Gude GRP 2500 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info