Bedienungsanleitung Gude GSF 1700 - 6.5 PS 230E 94583 (Seite 33 von 104) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628675

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

GSF 1700 - 6,5 PS | GSF 1700 - 6,5 PS E | GSF 1700 - 6,5 PS 230E

Check the ground on which the appliance is going to

be used and remove any items that might be caught or

thrown o by the appliance.

Wear gloves, protective glasses, closetting winter

clothes and solid shoes with a rough sole when wor-

king and providing maintenance.

Fuel is highly ammable.

Keep the fuel in suitable containers only.

The appliance may only be refuelled outdoors and

not near open re or burning cigarettes.

Refuel before starting the appliance. If the engine

is running or still hot, it must not be refuelled or

the tank cover opened.

Make sure the fuel does not overow. If the

fuel overows, the engine must not be started.

Remove any dirt from the appliance and prevent

any attempt at ignition until fuel fumes have

evaporated.

Use a grounded socket with three wires for all units

with electric driving engines or electric starters.

Set the working screw height so that it does not

touch the surface with rubble or road metal.

Do not adjust the appliance when the engine is

running (except for settings directly recommended by

the manufacturer).

Snow should be removed only after adjusting the snow

blower to the outdoor temperature when there are

extreme temperature dierences. Immediate snow

removing could lead to premature wear of the drive

shaft and other extensions such as the rubber ap.

There is a risk of items being thrown o at eyes when

working with power appliances.

Protective glasses or a shield should always be used

when operating, adjusting or repairing the appliance.

Do not put your hands and legs near the rotating

parts. Keep a safe distance from the eject hole.

Be extremely careful when running over or removing

snow o brash entrances, footpaths and paths. Be

prepared for unexpected risks or moving vehicles.

When you hit a foreign item, switch the engine o,

disconnect the cable from the spark plug and check

thoroughly the snow blower for any damage and

remove it if necessary – the snow blower can be put

into operation again and worked with now.

If the appliance starts abnormally vibrating, switch

the engine o and search for the cause immediately.

Generally, vibrations are a warning against operating

failure.

Switch the engine o every time you stop operating

the appliance, clean the working screw/rotor can/

eject tube and when executing repairs, adjusting and

inspecting the appliance..

When cleaning, repairing and checking the appliance,

make sure that the working screw/rotor and all mo-

ving parts are stopped.

Pull the cable out of electric motors.

Never use the appliance inside rooms; to be used

outdoors only.

Do not remove snow across slopes. Be extremely care-

ful when changing movement direction on slopes.

Never try to remove snow on steep slopes.

Never use the snow blower when guards, sheets

and other protection components are not installed

properly.

Never use the snow blower near glass surfaces, cars,

windows, pits, etc.; set the eject tube angle properly.

Children and pets must be in a sucient distance

from the appliance.

Do not overload the appliance; do not try to remove

snow too quickly.

Never use the appliance at a high travelling speed on

a slippery surface. Be careful when reversing.

Never aim the eject tube at bystanders. Do not allow

anyone to stand before the appliance.

Disconnect the working screw/rotor drive when the

snow blower is to be transported or when not being

used.

Use only extensions and accessories approved by the

snow blower manufacturer (e.g. wheel weights, counter-

weight, cabins, etc.).

The snow blower must only be used when appropri-

ate visibility or good lighting is provided. Stand fast

on the ground and hold the handle tight by hands at

all times. Walk, never run.

Do not allow anybody to stand on the appliance.

Switch the engine o and unplug it if you are not

working with the appliance or when leaving the

appliance or adjusting, maintaining or repairing it.

The appliance should only be used when in a perfect

state. Carry out a visual inspection before swit-

ching the appliance on. Check especially the safety

equipment, electrical control elements, power lines

and screw couplings for any damage and if they

are tightened appropriately. Replace any damaged

parts before the appliance is put into operation if

necessary.

Put the appliance out of operation and store it in a

closed room only after the engine has cooled down.

The engine must necessarily be lled with engine oil

ENGLISH

Güde Motor-Schneefräse 1700_1.4_E-Nummer 2.indd 29 10.08.12 16:53

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GSF 1700 - 6.5 PS 230E 94583 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info