Bedienungsanleitung Gude GSZ 500-1000 01709 (Seite 12 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628780

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Burden lifting with a haul-back block

The limit switch does not work when the cable reel

is operated with a haul-back block! Make sure the haul-

back block does not arrive to the cable reel nearer than

20 cm.

1. Unscrew the haul-back block.

2. Put cable to the haul-back block.

3. Screw the haul-back block together again and tighten

the screws.

4. Tie the lifted burden to the burden hook.

Disposal

The disposal instructions are based on icons placed on the

appliance or its package. The description of the meanings can

be found in the “Marking“ section.

Transport package disposal

The package protects the appliance against damage during

transport. Packing materials are usually chosen depending on

their environmental friendliness and disposal method and can

therefore be recycled. Returning the package to material

circulation saves raw materials and reduces waste disposal

costs. Parts of packages (e.g. foils, styropor®) can be

dangerous to children. Risk of suffocation! Keep parts of

packages away from children and dispose them as soon as

possible.

Handling requirements

The operating staff must carefully read the Operating

Instructions before using the appliance.

Qualification

Apart from the detailed instruction by a professional no

special qualification is necessary for using the appliance.

Minimum age

Only persons over 16 years of age can work with the

appliance. An exception includes youngsters if they work

within their professional education the purpose of which is to

obtain knowledge supervised by a trainer.

Training

Using the appliance only requires corresponding training by a

professional or following of the Operating Instructions. No

special training is necessary.

Technical data

Connector 230 V~50 Hz

Engine power 1600 W

Max. lifting power with haul-

back block

990 kg

Max. lifting power without haul-

back block

495 kg

Max. lifting height at 990 kg 6 m

Max. lifting height at 495 kg 12 m

Cable diameter 5,5 mm

Cable length 12 m

Protection type IP 54

Weight 32 kg

Transport and storing

When storing, it is necessary that the appliance is

put to a dry place, inaccessible to children and

unauthorised persons. Clean the appliance

thoroughly before longer putting out of operation.

Assembly and preparation

Installation

• When unpacking your cable reel, make sure the supply

includes all parts and check the state of the reel and

accessories if not faulty. To ensure guarantee validity,

any claim needs to be reported immediately after your

product is supplied.

• Please read thoroughly the Operating Instructions

supplied with the cable reel (this manual) and proceed

exactly according to the specified information when

installing the cable reel.

• The structural part the cable reel is to be fixed to must

be able to bear at least the double value of the expected

burden (consultation with an expert recommended).

• The cable reel is especially mounted to a steel tubular

bail arm. The used steel tube must have a diameter of

43 mm and its wall must be min. 3 mm thick.

• The bail arm must be firmly anchored in the wall.

Anchoring must be stable to stand up to generated

forces.

• Make sure the appliance is always fixed horizontally and

never awry.

• If a haul-back block is used hang the burden hook (d) to

the hook holder (j) and bracket (o).

Putting the electric cable reel into operation

Step 1

Make sure the system voltage corresponds to the voltage on

the type label of the cable reel.

Step 2

Check the steel cable and all safety devices of the cable reel.

Step 3

Check whether the cable reel is installed properly and is able

to hold the max. lifted burden.

Step 4

Secure the burden against turnover and swinging and check

the supporting members.

Step 5

Lift the burden vertically and control it.

Electric cable reel is now ready for operation!

Residual risks and protective measures

Electric residual risks:

Threat Description Protective measure(s)

Direct

electric

contact

Electric shock RCD

Indirect

electric

contact

Electric shock

through

medium

RCD

Other risks:

Threat Description Protective measure(s)

Thrown-away

items or

spraying

liquids

Oil can squirt

from the

electric cable

reel and cause

serious injuries.

Always wear gloves and

protective glasses.

Slipping,

tripping or fall

of persons

The feeder

cable and

appliance itself

can become a

cause of

tripping.

Depending on the installation

type, take appropriate

countermeasures suitable

installation place, installation

place marking, etc.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GSZ 500-1000 01709 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info