Bedienungsanleitung Gude GT 4200 Z 17304 (Seite 8 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628857

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Introduction

To enjoy your new GT 4200 gas heater as long as

possible, please read carefully the Operating Instructions

and the attached safety instructions before using it.

Further, we recommend keeping the Operating Instructions

to recall the product features in the future. Within the

continuous product development, we reserve the right to

make technical changes to improve it.

Translation of original operating instructions.

Appliance description (pic. 1)

1. Ignite here

2. Ceramic burner

3. Gas bottle holder

4. Clamping screw

5. Heater body

6. Gas volume controller

7. Safety valve

8. Wing nut

9. Toothed disk

10. Gas bottle hose

11. Pressure reducing valve

Technical specifications

Rated thermal load: 3.2 kW – 4.4 kW

Gas consumption: 200-336 g per hour

Gas category: 1 3 B/P butane/propane

Operating pressure: 50 mbar

Nozzle: 0.9mm

Dimensions: 320 x 120 x 235

Weight: app. 2.7kg

General safety instructions

Please read and follow all these instructions before putting

the appliance into operation.

Keep the safety instructions for future reference!

Safe work

Keep the place of your work clean!

Any mess in the place of your work may result in injuries.

Consider the environment influences!

Do not expose the appliance to rain.

Do not use the appliance in a moist or wet environment.

Provide adequate lighting.

Do not use the appliance near flammable liquids or gases.

Keep other persons in a safe distance!

Do not let other persons, especially children, touch the

appliance and the cable. Keep them in a sufficient distance

from the place of your work.

Store the appliance properly!

Appliances not being used must be kept in a dry and

locked place, inaccessible to children.

Do not overload the appliance!

You will work better and safer in the specified power

range.

Use the right appliance!

Do not use the appliance for purposes for which it has not

been designed.

Secure the appliance!

Mount the appliance professionally as specified in

“Installation”.

Take care of your appliance!

Comply with the servicing regulations and instructions.

At regular intervals, check the appliance cable and have it

replaced by an authorised professional if damaged.

At regular intervals, check the extension cable and replace

it if damaged.

Keep the handles dry, with no oil and grease.

Be careful!

Pay attention to what you are doing. Work reasonably. Do

not use the appliance when you are tired.

Make sure the appliance is not damaged!

Before continuing in using the appliance, it is necessary to

carefully check the protective equipment and any slightly

damaged parts whether still working properly.

Check whether the moving parts are working properly and

are not seized or damaged.

All parts must be installed properly and meet all conditions

to make sure perfect working of the appliance is

guaranteed.

Any damaged protective equipment and parts must be

repaired or replaced in an authorised workshop, unless

otherwise provided in the Operating Instructions.

Have any damaged switch replaced in a service workshop.

Do not use appliances where the switch cannot be turned

on and off.

WARNING!

Using any other accessory equipment may represent a risk

of injury for you.

Have your appliance repaired by an expert only!

This appliance meets the applicable safety provisions. Any

repairs may only be executed by an expert, using original

spare parts, otherwise, the user could face a risk of injury.

Appliance-specific safety instructions

• This appliance may only be used outdoors,

however, it must be always protected against

moisture or rain and MUST NOT BE used at

temperatures below 0°C.

• The appliance may only be used for heating

purposes.

• Caution! Sealing test with open fire is strictly

prohibited.

• Not to be put into operation beneath the Earth's

surface.

• Never carry or lift the appliance when in

operation.

• Never lift the appliance by any of its part when

attached to a bottle.

• Never ignite the appliance near the nozzle on

the back.

• The radiant surface must be at least 2 m from

any flammable substances.

• Keep a distance of 50 cm between the walls and

rear part or sides of the appliance.

• Close immediately the gas bottle valve and put

the appliance outside any source of fire in case

of gas leak (smell).

• Make sure all connections are tight.

• If gas keeps leaking, an expert must necessarily

be contacted before putting the appliance into

operation the next time.

• The appliance installation and servicing must

meet applicable laws and regulations of the

country where it is used.

• Never turn the gas bottle upside down, even if it

seems to be empty! It could cause the hose to

get clogged with remains from the gas bottle and

therefore a risk of fire and immediate damage to

the appliance.

• Never remove the safety screen and/or other

parts of the burner.

• Keep children in a safe distance from the burner.

• Never let the appliance unattended!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GT 4200 Z 17304 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info