Bedienungsanleitung Gude GTB 16-12RL 55192 (Seite 25 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

623123

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

GTB 16/5R | GTB 16/12RL

ENGLISH

b) Prevent contact of your body with earthed

surfaces, such as tubes, heating, cookers and

fridges. There is an increased risk of electric shock

if your body is earthed.

c) Do not expose electric tools to rain and moisture.

Water entered in electric tools increases the risk of

electric shock.

d) Do not use the cable in con ict with its designa-

tion, to carry or hang electric tools or to pull the

plug out of socket. Protect the cable against high

temperatures, oil, sharp edges or moving parts

of the machine. Damaged or entangled cables

increase the risk of electric shock.

e) When working with electric tools outdoors, use

extension cables suitable for outdoor use. Using

an extension cable suitable for outdoor use redu-

ces the risk of electric shock.

f) If operating electric tools in wet conditions can-

not be avoided, use a safety switch against stray

current. Using a safety switch against stray current

reduces the risk of electric shock.

3) Safety of persons

a) Be careful, pay attention to what you are doing

and use common sense when working with

electric tools. Do not use electric tools when you

are tired or under the in uence of drugs, alcohol

or pharmaceuticals. A moment if inattention when

using electric tools may lead to serious injuries.

b) Use personal protective equipment and protec-

tive glasses at all times. Using personal protective

equipment, such as the respirator, non-slip shoes,

protective helmet or ear protectors, depending on

the type and use of electric tools, reduces the risk

of injuries.

c) Prevent the machine from unintentional starting.

Before plugging and/or connecting the machine

to battery, handling or carrying, make sure the

electric tools are switched o . Having a  nger on

the switch when carrying the electric tool or when

the machine is on when plugging it may lead to

injuries.

d) Before starting any electric tool, remove any

adjusting wrenches and screwdrivers. A tool or a

wrench present in the rotating part of the machine

may lead to injuries.

e) Avoid any abnormal body posture. Provide good

stability and keep balance at all times. By this,

electric tools are better controlled in unexpected

situations.

f) Wear appropriate clothing. Do not wear loose

clothing and jewels. Keep hair, clothing and glo-

ves out of rotating parts. Loose clothing, jewels

and long hair may get caught by moving parts.

g) If dust exhausters and catchers are to be

installed, make sure they are  tted and used

properly. Using a dust exhauster may reduce the

exposure to dust.

4) Use and treatment of electric tools

a) Do not overload the machine. Use appropriate

electric tools for your work. Working with appro-

priate electric tools is better and safer when within

the speci ed power range.

b) Do not use electric tools with a defective switch.

An electric tool that cannot be switched on or o is

dangerous and must be repaired.

c) Unplug the machine and/or remove the battery

before any machine adjustment, replacement of

accessory equipment and storing the machine.

This safety measure prevents unintentional star-

ting of the electric tool.

d) Keep any electric tool that is not being used out

of reach of children. The machine must not be

used by persons not familiarised with its use and

not having read these Instructions. Electric tools

are dangerous if used by inexperienced persons.

e) Treat electric tools carefully. Check whether the

moving parts work perfectly and do not drag,

whether not broken or damaged to such an

extent that functioning of electric tools could

be a ected. Have any damaged parts repaired

before using the machine. Poor maintenance of

electric tools is a cause of many injuries.

f) Keep the cutting tools sharp and clean. Carefully

treated cutting tools with sharp edges get stuck

less often and are easier to guide.

g) Electric tools, accessory equipment, extensions,

etc. to be used in accordance with these Instruc-

tions. Consider the working conditions and the

activity being performed. Using electric tools for

purposes other than those speci ed may lead to

dangerous situations.

5) Service

a) Have your electric tools repaired by quali ed

authorised sta only, using original spare parts

only. The safety of electric tools will be maintained

by this.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GTB 16-12RL 55192 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info