Bedienungsanleitung Gude GTB 16-605 - 55202 (Seite 28 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

623138

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

DEGB

Use protective equipment which t you. Wear

safety goggles and ear protection at all times. A dust

mask or respirator is also required. Wear tight-tting

gloves at all times when handling sharp blades and

saw blades,

If dust exhausters and catchers are to be installed,

make sure they are tted and used properly. Using

a dust exhauster may reduce the exposure to dust.

Do not use the cable in conict with its designa

tion, to carry or hang electric tools or to pull the

plug out of sock

et. Protect the cable against high

temperatures, oil, sharp edges or moving parts of

the machine. Damaged or entangled cables increase

the risk of electric shock.

Secure the workpiece. Use clamping equipment

or a vice to secure the workpiece. This will be safer

than holding it in your hand.

Avoid any abnormal body posture. Provide good

stability and keep balance at all times. By this,

electric tools are better controlled in unexpected

situations.

Treat electric tools carefully.

Keep the cutting tools sharp and clean. Carefully

treated cutting tools with sharp edges get stuck less

often and are easier to guide.

Follow the instructions for lubricating and chan

ging tools.

Check the c

onnection cable on the electric tool at

regular intervals and have it replaced by an expert

if it is damaged.

Check the extension cables at regular intervals and

replace them if they are damaged.

Keep the handles dry, clean and free of oil and

grease.

Pull the plug out of the socket and/or remove the

battery when the tool is not in use before you

make machine settings or change accessories,

such as the saw blade, drill bit or cutter. This safety

measure prevents unintentional starting of the

electric tool.

Before starting any electric tool, remove any

adjusting wrenches and screwdrivers. A tool or a

wrench present in the rotating part of the machine

may lead to injuries.

Prevent the machine from unintentional starting.

Before plugging and/or connecting the machine

to battery, handling or carrying, make sure the

electric tools are switched o. Having a nger on

the switch when carrying the electric tool or when the

machine is on when plugging it may lead to injuries.

If you wish to work outdoors with an electric tool,

only use extension cables which are approved for

outdoor use and are marked accordingly. Using an

extension cable suitable for outdoor use reduces the

risk of electric shock.

Be careful, pay attention to what you are doing

and use common sense when working with

electric tools. Do not use electric tools when you

are tired or under the inuence of drugs, alcohol

or pharmaceuticals. A moment if inattention when

using electric tools may lead to serious injuries.

Check the machine for any damage:. Before using

the equipment again, the protective equipment

must carefully be checked if safe and working as

designated.

Check the moving parts for perfect functioning, if

working smoothly and if no parts are damaged. To

provide safe operation of the equipment, all parts

must be installed properly and meet all conditions.

Damaged protective equipment and parts must be

professionally repaired or replaced by a recognised

professional workshop, unless otherwise specied

in the Operating Instructions.

Do not use electric tools with a defective switch.

An electric tool that cannot be switched on or o is

dangerous and must be repaired.

Have your electric tool repaired by an electrician.

This electric tools complies with the relevant safety

regulations. Repairs may only be carried out by an

electrician using genuine spare parts; otherwise the

user may suer accidents.

Caution!

The machine must be secured to the oor using

suitable screws since otherwise there is a risk that it

will tip over.

Inspect before each use.

• Proper function of the on and o button, incl. the

emergency switch.

• Carry out a visual inspection before switching the

appliance on.

• Check especially the safety equipment, electrical

control elements, power lines and screw couplings

for any damage and if they are tightened approp

riately. If necessary, replace damaged parts before

opera

tion.

• Ensure that the bench clamping lever is tightly

secured before starting up the machine.

• Ensure that the drill is safely secured in the clam

ping chuck.

•

REMOVE ADJUSTING KEYS AND WRENCHES. From

habit of checking to see that keys and adjusting

wrenches are removed from tool before turning

it “ON”.

Risk of injury!

Keep body parts and clothes away from rotating

parts of the device.

Use protective equipment which t you.

Wear a hairnet if you have long hair.

Do not wear gloves when operating a drill.

Do not attempt to drill into a material that does not

have a at surface, unless you are using a suitable

support.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GTB 16-605 - 55202 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info