Bedienungsanleitung Gude GTT 900 94138 (Seite 10 von 57) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628248

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Attention! Important information for the customer

It is recommended to plunge or put the pump sideways in

the liquid. The body air cushion can thus be released and

the pump starts immediately working. The pump can

subsequently be stood straight.

Attention! Important information for the customer

To ensure long service life of the pump seal, we

recommend rinsing the pump with clean water in regular

intervals.

Thermal fuse/engine protection circuit-breaker

The drowned pump is equipped with an engine protection

circuit-breaker. If the engine is overheated, the engine

protection circuit-breaker will automatically switch the pump

off. Cooling time is app. 25 minutes, the pump subsequently

switches on. If the engine protection circuit-breaker switches

on, it is absolutely necessary to identify the cause and

remove it (see also the “Failure searching“). The given data

cannot be used for “family style“ repairs as it requires specific

professional knowledge. You must contact the customer

service department at any failures.

Residual risks and protective measures

Electric residual risks:

Threat Description Protective measure(s)

Direct

electric

contact

Electric shock Safety switch against FI stray

current

Indirect

electric

contact

Electric shock

through

medium

Safety switch against FI stray

current

Emergency Action

Apply the first aid adequate to the injury and get qualified

medical assistance as quickly as possible. Protect the

injured person from more accidents and calm him/her down.

For the sake of eventual accident, in accordance with

DIN 13164, a workplace has to be fitted with a first-aid

kit. It is essential to replace any used material in the

first-aid kit immediately after it has been used. If you

seek help, state the following pieces of information:

1. Accident site

2. Accident type

3. Number of injured persons

4. Injury type(s)

Requirements for operating staff

The operating staff must carefully read the Operating

Instructions before using the appliance.

Qualification

Apart from the detailed instructions by a professional, no

special qualification is necessary for appliance using.

Minimum age

Persons over 16 years of age can only work on the appliance.

An exception includes youngsters trained in order to reach

knowledge under supervision of the trainer during

occupational education.

Training

Using the appliance only requires corresponding training by a

professional or the Operating Instructions. No special training

is necessary.

Technical data

GTT 900

Connection 230 V(P1)

Engine power 900 W/P1

Protection type: IPX8/IPX4

Max. amount delivered: 4500 l/h.

Max. head of delivery 60m

Max. plunge depth: 15 m

Max. water temperature: 35°C

Hose connection 1“

Granularity: 1 mm

Weight: ca 11,4 kg

Order No. 94138

Transport and storage

At winter storing, it is necessary to make sure there is

no water in the appliance as the frost could damage the

appliance.

Safety instructions for first putting into operation

Attention: The pump must not run without fillings.

The user is responsible to third parties if pump (pumping

station, etc.) is used.

To be operated on connections with a safety switch

against stray current (RCD) only!

Before putting into operation, a competent electrician must

check whether electric safety devices are in place.

Electric connection to a socket.

Check the voltage. Technical data given on the type label

must correspond with electric network voltage.

If the pump is used in ponds, wells, etc. and appropriate pumping

stations, standards valid for pumps in the given country must

unconditionally be observed.

Electric pumps used outdoors (e.g. in ponds, etc.) must be

equipped with a H07RNF type rubber connecting cable,

according to DIN 57282 or DIN 57245 standards.



If the pump is in operation, neither people nor

animals can be present or plunged in the pumped

liquid (e.g. pools, cellars, etc.).

The temperature of the drained liquid must not exceed +35

°C. If an extension cable is used, it must solely be out of

rubber, H07RNF type, according to DIN 57282 or DIN

57245 standards.

Never touch, lift or carry with a cable a pump

connected to network (pic. E)

It is necessary to make sure the connecting socket was not

near water and humidity and the plug was protected against

humidity.

Before putting the pump into operation, check whether the

electric cable and/or socket are not damaged.

Before any work on the pump, pull the plug out of the

socket.

Instructions step by step

 Connect the water hose to appropriate pump outlet (see

the Assembly and first putting into operation).

 Fix the rope, chain, etc. to the pump handle and place it

to the right place.

 Put the pump “sideways“ (pic. D) to the pumped medium.

 Plug in the pump.

 Rinse the pump with clean water after work finishing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GTT 900 94138 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info