Bedienungsanleitung Gude GV 1300 E 2 IN 1 94121 (Seite 11 von 42) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

626238

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Transport container disposal

The container protects the appliance against damage

during transport. Container materials are usually selected

so as not to harm the environment and dispose them in an

environment-friendly manner.

Returning the container back in the circulation saves raw

materials and reduces waste disposal costs.

Parts of the container (e.g. foils, styropore) can be

dangerous for children. Risk of suffocation!

Keep parts of the container out of reach of children and

dispose them as quickly as possible.

Operating staff requirements

The operator must carefully read and understand the

Operating Instructions before using the appliance.

Qualification

No special qualification is necessary for using the appliance

apart from detailed instruction by an expert.

Minimum age

The appliance can only be operated by persons over 18

years of age that have been familiarised with its operation

and working. Young people between 16 and 18 years of

age can only work with the appliance under adult

supervision.

An exception includes youngsters operating the appliance

within their professional education to achieve necessary

skills under trainer's supervision.

Training

Using the appliance requires only corresponding instruction

by a professional or reading the Operating Instructions. No

special training necessary.

Transport and storage

• The appliance must be cleaned thoroughly and kept

out of reach of unauthorised persons when stored for a

longer period of time.

• Secure the appliance against turnover before every

transport.

Assembly/first starting up

Some parts are dismantled in the verticutter/aerator supply

to make transport easier. Screws, wheels, plastic hand

wheels, cable clamps and screwdrivers are in a plastic bag.

The appliance can be easily assembled by following the

instructions below:

Handle post assembly

• Take the verticutter out of the container.

• Insert the bottom post with the handle in holes on

the verticutter (pic. 2)

• Now press the middle connecting post to the

bottom post and screw both parts together using

star screws (included in the supply). You can

choose from three different holes of the middle

connecting post when the required height is

adjusted (pic. 3).

• Insert the connecting cable pull relief in the upper

part of the post with handle. Then press the upper

connecting post to the middle post and screw

both parts together using star screws (included in

the supply (pic. 4).

• Fix the cable from the 2-point safety switch to the

engine with the attached cable clamps to the

upper parts of the post with handle (pic. 5).

Verticutter height calibration

• Adjust the verticutter height by turning the adjusting

screw (pic. 6).

• Turn the adjusting screw to the required position and

adjust the appropriate verticutter height.

Collection container assembly

• Connect the cloth container with the metal frame (pic.

7, 8) (pic. 13-19) and fasten tightly with plastic

container clamps on the metal frame.

• Open the rear cover and hang the collection

container on the holding rod on the cover using two

hooks (pic. 8) (pic. 13-19)

Connecting cable pull relief

• To prevent accidental pull-out of the connecting cable

from the 2-point safety switch, please make sure the

connecting cable is correctly fastened to the cable

pull relief (pic. 9, 10).

Knife shaft change

• The appliance has two functions. The verticutter knife

is assembled on the appliance. The aerating shaft is

included in the supply. The shaft can be changed by

you. Proceed as follows:

• Loosen the two screws first (pic. 11a) and remove

the existing knife.

• Insert a new knife and fasten it with screws.

Verticutter starting up

• Before aerating, make sure the knife or its connecting

elements are not damaged in any way. Replace any

damaged knife if necessary.

• Switch off the engine and disconnect the electric

cable before inspecting the appliance. To prevent

unintentional verticutter starting up, the 2-point safety

switch is fitted with a safety button (pic. 10/A) that

must be pressed before the switch lever is released

(pic. 10/B).

• When releasing the switch lever the button must be in

the original position.

• Make sure the extension cable is not within reach of

steel springs. Press the safety switch and pull in the

switch lever (pic. 10).

• This step needs to be repeated several times before

aerating to make sure everything works properly.

WARNING!!! You must unconditionally wait

until the steel springs stop rotating and are idle for

any adjustment, maintenance or repairs of your

verticutter/aerator. The verticutter must

unconditionally be unplugged before these works.

Operation and adjusting

Adjust the appliance only when the plug is

disconnected otherwise there is a high risk of injury.

Aerating

• Select the working height suitable for the actual grass

height.

• Prevent situations when the extension cable cannot

move freely (pic. 12).

• Move the appliance at appropriate speed. Do not

move it too fast to prevent the ejection hole from

getting blocked and engine from useless overloading.

• Never

work with the appliance when raining and on

wet grass.

Gude GV 1300 E 2 IN 1 94121 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info