624567
14
Zoom out
Zoom in
Vorherige Seite
1/82
Nächste Seite
Assembly
The saw-chain grinding machine is delivered pre-assembled. One part consists
of the base, on which the chain guide is located. The other part is a bearing arm
with the motor and handgrip.
The assembly shall be performed with the machine unplugged!
The machine design provides either for a desk installation or wall mounting.
When installing it on the desk, put the machine on the edge of the desk to the
stop (Fig. 1) and screw it to the desk using the holes in the base.
When mounting on the wall, use the respective holes in the vertical part of the
base (here, a distance from the wall should be kept or spacers should be used
for the access to the rear set screw to be preserved).
After the desk top installation, fit the arm in the base inserting the pilot pin and
securing it with a hexagonal screw (Fig.2)
Now, it is possible to fit a washer on the rear side screw and screw the setting
and screw the setting wheel on. (Fig. 3).
Screw the supporting arm control holder on the screw in the grinding disk body
(Fig.4)
Fit the grinding disk enclosure on using the supplied screws and a respective
wrench (Fig. 5).
Tip:
When mounting on the wall, take care to mount the machine at a height of
120 – 130 cm from the floor to avoid working at eye height!
To be able to install the disk, it is necessary to unscrew the auxiliary flange (Fig.
6).
1
2
3
4
5
6
14
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gude P 2500 94131 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info