Bedienungsanleitung Gude Pro 11 PRO 75195 (Seite 9 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

629037

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

in conflict with the designation. The manufacturer will not be

liable for any consequential damage and injuries. Please be

sure to know that the appliance has not been designed for

industrial purposes.

Installation and putting the appliance into operation

Before putting the appliance into operation:

Follow the technical specifications, pictures, position

numbers, use as designated provisions and the safety

instructions. Carry out a visual inspection. Remove the battery

cover on the tyre filler. Do the settings on the display.

Functions on the display (pictures 2, 3, 4, 5)

The multifunctional display enables various settings that must

be made before using the appliance.

• Appliance switch-on

• Calibration (pressure indicator reset)

• Selection of the display switch-off time when the

appliance is not being used.

• Pressure indicator measure unit selection.

1. Press the multifunctional button "ON" on the tyre filler

display  The appliance gets switched on. (picture 2)

2. Then, keep the multifunctional button "ON" pressed

for at least 3 seconds before " ------" appears. Now

you are in the selection mode with 0/1/2/END on

the display (picture 3)

3. After repeated pressing of the multifunctional button

"ON" when 0, 1, 2 or END appears you will get to

the respective submenu. You will leave the

selection mode after selecting "END" (picture 4)

Calibration (0) (picture 4)

1. While in the selection mode, press the

multifunctional button "ON" when "0" appears and

calibrate the appliance by repeated pressing of the

multifunctional button "ON".

Display switch-off time selection (1) (picture 5)

1. While in the selection mode, press the

multifunctional button "ON" when "1" appears and

select the display switch-off time by repeated

pressing of the multifunctional button "ON" when

the required switch-off time appears (60 seconds,

120 seconds or 180 seconds)

Measure unit selection (2) (picture 6)

1. While in the selection mode, press the

multifunctional button "ON" when "2" appears and

select the tyre filler measure unit by repeated

pressing of the multifunctional button "ON" when a

strip above the required measure unit appears.

2. The tyre filler is now ready for operation.

Operation

1. Fit in the filter pressure control valve as necessary.

2. Do not press the pneumatic hose quick-acting

coupling on the connection thread and switch the

compressor on.

3. Push the valve plug on the valve. Hold the hose

when filling or correcting!

4. Press the control lever or the button. Filling of

discharging will follow.

5. Release the control lever or the button. On the

display, read the pressure in the tyres.

6. Pull/release the valve plug from the valve after the

right pressure in the tyres is achieved.

7. After use: disconnect the quick-acting coupling from

the connection thread and clean and store the

appliance when dry.

Changing the battery

The display is supplied by 2 LR 44 alkaline manganese button

batteries behind the display (battery life of app. 3 years)

If the display is not accurate or is working incorrectly, the

button batteries must be changed. Take the following steps:

Remove the 3 screws on the top of the display and remove

the upper part. Now the two button batteries can be changed

for new ones.

Residual risks and protective measures

Neglecting the ergonomic principles

Inadequate local lighting

Inadequate lighting represents a high safety risk. Adequate

lighting must always be provided for work with the appliance.

Warranty

The warranty exclusively applies to material or manufacturing

defects. An original purchase voucher with the purchase date

must be provided for lodging a claim in the warranty period.

The warranty does not cover any unauthorised use such as

appliance overload, violent use, damage by a foreign person

or an undesirable item. Failure to follow the Operating

Instructions or assembly instructions and ordinary wear and

tear are also excluded from the warranty.

Behaviour in case of emergency

Provide necessary first aid treatment corresponding to the

injury nature and seek qualified medical help as soon as

possible. Protect the injured person from other injuries and

calm him/her down.

First aid kit must always be available in the place of your

work in case of accident in accordance with DIN 13164.

Material taken out of the first aid kit needs to be

supplemented right away.

If help is needed, please provide the following details:

1. Place of accident

2. Accident nature

3. Number of injured persons

4. Injury type

Disposal

The disposal instructions are based on icons placed on the

appliance or its package. The description of the meanings can

be found in the “Marking” section.

Transport package disposal

The package protects the appliance against damage during

transport. Packing materials are usually chosen depending on

their environmental friendliness and disposal method and can

therefore be recycled.

Psi Bar MPa

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude Pro 11 PRO 75195 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info