Bedienungsanleitung Gude Pro 9000 PRO 75175 (Seite 7 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

629049

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Supply includes

Picture 1:

1. Control lever

2. Compressed air connector

3. Handle

4. Stop arch

5. Circular-saw blade

6. Pneumatic joint

7. Safety switch

Appliance

9000 PRO pneumatic sheet cutter

Professional pneumatic sheet cutter suitable for small cut

radius, with a rubber-coated handle for effortless work with

minimum vibrations. Safety switch against unintentional

switching on. Stop

arch and compressed air connector with a joint to prevent air

hose from breaking.

Warranty

A warranty period of 12 months applies to commercial use

and 24 months apply to private use and commences on the

day of purchase of the device.

Warranty applies exclusively to failures due to defective

material or workmanship. An original sale slip with indication

of date of sale must be presented in case of claiming for the

warranty rights.

Warranty does not cover unprofessional use such as device

overload, violent use, damage caused by third party or foreign

materials, failure to comply with operations and assembly

manual, and normal wear and tear.

Technical data

9000 PRO

Service pressure 6.3 bar

Air consumption 170 - 220 l/min

Air connector-thread ¼”

Recomm. hose cross sect. 10 mm

Lwa noise data 82 dB

Cutting power

(steel) 2,9 mm

(aluminium) 3,2 mm

Vibration acceleration 27,2 m/sec²

Number of strokes 9000 min

-1

Stroke height 10 mm

Weight 0,65 kg

Order No. 75175

General safety instructions

Safety notice! Failing to follow these instructions

can cause an injury to you or other persons.

1. Read the following Operating Instructions for using

the pneumatic appliance and follow the safety

instructions for using the pneumatic appliance.

2. ALWAYS wear proven protective glasses, ear

protectors, a breathing mask and safety gloves.

3. Use a distribution hose.

4. The control lever cannot be used when the

appliance is being connected with air supply.

5. Disconnect the appliance from air supply if not

used. NEVER replace any parts of the accessories

or SERVICE them if the appliance is connected with

the air supply.

6. Ensure a safe distance. Make sure you did not lose

balance.

7. Ensure that your hands could freely move while

working on the appliance to be able to execute the

work safely.

8. Use the appliance only at a speed for which it has

been designed.

9. Properly maintain the appliance and follow all

instructions for appliance lubrication and

maintenance.

10. Do not damage the hoses and connecting pieces

by carrying the appliance with its hose or by

disconnecting the hose from the air supply by

pulling. Prevent the hose from coming into contact

with high temperatures, oil and sharp edges. The

hose should be replaced if damaged or worn out.

11. Store cleaning cloths and other combustible

materials in secured metal containers. The

containers must be disposed according to local,

national or regional regulations.

12. NEVER operate the appliance with an air pressure

higher than 9 bar. Use the pressure regulator that

will reduce the air pressure to 6 bar.

13. Do not needlessly use long pneumatic hoses to

avoid tripping.

14. Never use circular-saw blades that are damaged or

bent.

15. Never leave the pneumatic appliance unattended.

16. Keep the pneumatic appliance away from children

and unauthorised persons.

17. Never aim at people or animals with the air current.

18. Never put the pneumatic appliance near body holes

– it can lead to injuries dangerous to life!

19. Attention! Risk of cutting injuries by the circular-saw

blade.

Before starting

Air supply

Important information on the appliance can be found in model

specifications.

Lubricate the appliance before putting it into operation

(see the Maintenance).

Operation

Wear protective glasses! Wear earphones! Wear

safety gloves!

Before everyday use, please empty the water from the

compressor tank and blow the condensation from the air

hose.

If seal has not yet been applied on the pneumatic insertion

wrap it with a Teflon tape (picture 2 and 3)

1. Press the safety switch.

2. Carefully press the control lever down. When you

are finished with grinding, loosen the control lever

and only after that, lift the grinding machine.

3. After finishing your work, first lift the cutter and then

relieve the control lever.

Maintenance and treatment

Trained persons are allowed to execute the maintenance

works only.

Following the mentioned instructions for maintenance is a

guarantee for a long service life and trouble-free operation of

this high-quality product. Disconnect the appliance from the

compressed air source at maintenance and treatment. For

permanent faultless operation of your appliance it is

necessary to ensure everyday cleaning and regular

lubricating. Use special pneumatic oil only.

You can choose from the following options:

a) Via mist lubricator

The complete maintenance unit contains a mist lubricator

and is attached to the compressor.

b) Via lubricator on the piping

In the immediate vicinity of the appliance (in a distance of

app. 50 cm) a lubricator is installed on the piping that

supplies sufficient volume of oil to the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude Pro 9000 PRO 75175 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info