629053

Gude Pro PBK 500 75771 Seite 28

28
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
24
GB
It is necessary to select a saw blade which is suitable for
the material being cut.
Do not use saw blades not corresponding to the key data
given in these instructions for use.
Properly sharpened saw blades to be used only.
It is essential to adhere to the maximum speed specied
on the saw blade.
Do not use saw blades made of high-speed steel. Only use
tools that meet standard EN 847-1.
Transport and store the tools in a suitable container;
To minimise noise, the tool must be sharpened and all
noise reducing elements (covers etc.) must be properly
adjusted.
Familiarise with the safety procedures for cleaning,
maintenance and regular removal of sawdust and dust to
reduce the risk of re.
Make sure the ange used is suitable for the given purpo
-
se of use, as specied by the manufacturer.
Switch the machine immedia
tely o when blocked.
Unplug the machine and remove the stuck piece of wood.
Handling equipment to be used only when handling the
machine.
Maintenance
Before carrying out any work on the machine,
disconnect the plug from the socket.
WARNING The machine must not be used under any
circumstances if the machine or the safety devices are
damaged.
Repairs and works specied in these Instructions may
only be performed by qualied authorised sta.
At all times, keep the machine, ventilation slots, in
particular, clean. The sawdust ejection and/or dust ex-
hauster should be cleaned at regular intervals. Never
spray w
ater on the machine!
Replace the table insert when worn
The ball bearings of the saw shaft are protected
against dust and are therefore service-free, i.e. the
bearings need not be lubricated.
Use only original accessories and original spare parts.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insucient mainte
-
nance and care can lead to unforeseen accidents and
injuries.
Nev
er clean the machine and its components with
solvents, ammable or toxic liquids. Us only a damp
cloth making.
Apply environment-friendly oil to all moving parts.
If necessary, a list of spare parts can be found at www.
guede.com.
The processed bundle of workpieces and nished work
-
pieces should be placed near the standard place of work
of the operat
or.
Switch the machine o and unplug it when unattended.
Check all screw and plug-in connections and
protective equipment if rm and tightened
properly and whether all moving parts are
running smooth whenever the appliance is to be
put into operation.
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Any faults with the machine, including any related to
the safeguard or the saw blades, must be reported to
the persons in charge of safety as soon as the faults are
discovered.
Before use check machine, cable, and plug for any dama
-
ges or material fatigue. Repairs should only be carried out
by authorised S
ervice Agents. Check the emergency
switch-o whenever you are to use the appliance.
Before pressing On/O, make sure the saw blade has
been tted properly.
The saw must not be used any longer if the saw blade fails
to stop in 10 seconds after switching the machine o.
For security, use devices such as safety- and pressure
device, guide slide, rip fence, etc.
During round timber cutting it is necessary to x the
workpiece against rotation by means of xing tool and
use circular saw type suitable for cross cuts.
Do not use circular saws for cutting slots (grooves in
workpiece).
No grooves or cuts allowed.
Support large panels to minimise the risk of blade pin
-
ching and kickback. Large panels tend to sag under their
own weigh
t. Supports must be placed under the panel
on both sides, near the line of cut and near the edge of
the panel.
Removing sawdust and chippings from the machine
when running is strictly prohibited.
It is necessary to refrain from removing any cuttings and
parts of workpieces from the cutting area.
Do not use blunt, damaged or distorted circular saw
blades.
The teeth thickness, or the set of the teeth must be thicker
than the body of the blade and the riving knife. Do not
remove the riving knife.
ENGLISH
… 28 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gude Pro PBK 500 75771 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info