Bedienungsanleitung Gude Pro PRS 700 75772 (Seite 10 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

629054

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Introduction

To enjoy your new machine as long as possible, please

read carefully the Operating Instructions and the attached

safety instructions before using it. Further, we recommend

keeping the Operating Instructions to recall the product

features in the future.

Within the continuous product development, we

reserve the right to make technical changes to

improve it.

This document represents original Operating

Instructions.

Machine description (pic. 1)

1. Travelling wheels

2. Plug

3. Switch

4. Electric motor

5. Travel handle

6. Sawdust container

7. Saw bench

8. Handle

9. Barb

Use as designated

The cradle circular saw with tilting table has been

exclusively designed for cutting firewood, vertically to

fibres, up to the diameter of 220 mm.

The machine cannot be used for works other than for

which the machine has been designed and that are

specified in the Operating Instructions.

Any other use will be considered a use in conflict with the

designation. The manufacturer will not be liable for any

consequential damage and injuries. Please be sure to

know that the machine has not been designed for industrial

purposes.

Supply includes

Take the machine out of the transport package and check

it whether there are the following parts:

1 piece PRS 700 Cradle Circular Saw with Tilting Table

1 piece Travel handle

1 piece Hard-metal circular-saw blade (Made in Germany)

1 piece User Guide

Please contact your dealer if any parts are missing or are

damaged.

Technical specifications

Voltage~frequency: 400 V~50 Hz

Engine output: 5.2 kW P1

Circular-saw blade: Ø 700 mm/42 teeth

Circular-saw blade fixture: 30 mm

Cutting power: min. 80 mm – max. 220 mm

Operating height: 840 mm

Table length: 1,360 mm

Table width: 820 mm

Weight: 133 kg

Dimensions L x W x H: 1,470 x 830 x 1,570 mm

Before putting the machine into operation

It is prohibited to put the machine into operation

before familiarising with these Operating Instructions

and all safety regulations. Please ask professionals for

help if you are not experienced in handling machines

of this type.

• Unpack the saw and check it for any damage during

transport.

• The machine may only be operated outdoors.

• The machine must stand on a horizontal and level

floor and be firmly anchored to the base using the

fixing holes in the foot. The ground around the

machine must be free of any waste, slippery places

and places with a risk of tripping.

• All covers and safety equipment must be fitted

properly and the circular-saw blade must rotate freely.

• Check the circular-saw blade if fitted firmly, if not dirty,

damaged and if sharpened properly. Regrind or

replace any blunt circular-saw blade.

• Check all the screwed connection if tightened

properly.

• Check whether the machine cannot throw off any

undesirable items.

• The source of current must be protected with a safety

switch against stray current of 30mA.

• Before plugging the machine, make sure the details

on the type label correspond to the system details.

• Important: It is necessary to pay attention to the

engine rotation direction. To check it, switch the

engine on and off for a short time. The circular-saw

blade must rotate from the left in the clockwise

direction (see the rotation direction arrow on the

circular-saw blade). If this is not the case, the rotation

direction must be changed using the phase converter

on the connecting plug. Turn the phase converter in

the connecting plug by 180° using a screwdriver (see

pic. 2).

• Cutting several pieces of wood or a wood bundle at

the same time is not allowed - risk of injury!

• Before pressing the On/Off button, make sure the

circular-saw blade is fitted properly and the moving

parts rotate easily.

Caution: Machine to be operated by one person

only. The operator must make sure that other persons are

necessarily in a safe distance from the saw during the

operation; the minimum distance is 2 m!

Caution: Pieces of wood that are too short, too light

or too thin to be caught by the barbs in the load cradle

must not be processed by the machine. Follow the

Technical Specifications.

General safety instructions

PLEASE FOLLOW CAREFULLY THESE

INSTRUCTIONS TO ENSURE A HIGH SAFETY LEVEL:

Protective equipment

All the screwing and connectors and protective

equipment and the circular-saw blade need to be

checked before being put into operation if tightened or

more precisely fitted properly.

It is strictly prohibited to dismount the protective

equipment fitted on the machine, change them, remove

them for any purpose or fit other protective parts. Works

connected with tool change, maintenance and servicing

that may only be performed with protective parts being

removed may only be performed with the power supply

being interrupted by unplugging the machine.

Power supply interruption just by turning the switch off is

not enough!

After finishing your work, refit all the protective equipment

to where it belongs before plugging the machine and

putting it into operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude Pro PRS 700 75772 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info