Bedienungsanleitung Gude Pro PWS 650 BR 75782 (Seite 41 von 112) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

629056

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

PWS 650 BR | PWS 700 BR ENGLISH

any type: the risk will be borne by the user.

Optional changes to the saw exclude the liability

of the manufacturer for consequential damage of

any type.

The saw may only be made ready, used and

maintained by persons familiarised with such acts

and instructed in possible risks. Repairs may only be

executed by us or by customer services speci ed by

us. The machine must not be used in an explosion-

risk environment and must not be exposed to rain.

Metal parts (nails, etc.) must necessarily be removed

from the material cut.

Safe removal of possible blocking

Switch the engine o and wait until the circular saw

blade stops.

Check it and localise the blocking.

Remove the blocking while considering all safety

instructions.

Check the machine visually and make sure it is not

damaged. In particular, the saw blade must not show

any sign of damage.

Contact the Technical Assistance (see Servicing) if

there is any doubt regarding the blocking removal or

full operability.

Maintenance

Vor allen Arbeiten am Gerät Motor abstellen

und Zündkerzenstecker ziehen. Warten Sie, bis alle

rotierenden Teile zum Stillstand gekommen sind

und sich das Gerät abgekühlt hat.

• Check all screw and plug-in connections and pro-

tective equipment if  rm and tightened properly

and whether all moving parts are running smooth

whenever the appliance is to be put into operation.

• Prior to every use, visually check the machine to

rule out any defects.

Keep the appliance, especially the tank and engine,

clean at all times.

The sawdust ejection and/or dust exhauster should

be cleaned at regular intervals. Never spray water on

the machine!

All moving parts should be treated with environmen-

tal-friendly oil. Never use any grease!

Check the wear of the saw blade. Blunt saw blades

must be sharpened. Clean saw blades covered with

resin.

The ball bearings of the saw shaft are protected

against dust and are therefore service-free, i.e. the

bearings need not be lubricated.

Repairs and works speci ed in these Instructions may

only be performed by quali ed authorised sta .

Use only original accessories and original spare parts.

Only a regularly maintained and treated appliance

can serve as a satisfactory aid. Insu cient mainte-

nance and care can lead to unforeseen accidents and

injuries.

Deactivation and disposal

If the machine can no longer be used and it is to be

disposed, it must be deactivated and disassembled, i.e.

it must be put to a state in which it may not be used for

purposes for which it has been designed. The process

of disposal must consider the recovery of basic materi-

als of the machine. These materials can be potentially

reused in the recycling process. The manufacturer re-

jects any liability for any personal or property damage

incurred as a result of reuse of parts of the machine if

such parts are used for purpose other than the original

respective purpose. Machine deactivation: Each pro-

cess of deactivation or disposal must be performed by

sta trained for this purpose.

• The machine is disintegrated into parts.

• Block each moving part of the machine.

• Each machine element should be delivered to

certi ed collection centres.

• Rubber parts should be removed from the machine

and delivered to a rubber parts collection centre.

• There is no other residual risk after deactivation and

blocking of the moving parts.

• Electrical structural elements are a special waste and

need to be disposed separately from the machine.

Approved extinguishers (e.g. powder extinguisher)

need to be used in case of  re of the electrical

equipment of the machine.

Guarantee

Guarantee claims as per guarantee card attached.

The guarantee solely covers inadequacies caused

by material defect or manufacturing defect. Original

payment voucher with the sales date needs to be sub-

mitted for any claim in the guarantee period.

The guarantee does not cover any unauthorised

use such as appliance overloading, use of violence,

damage as a result of any unauthorised interference

or caused by foreign items. Failing to follow the ope-

rating and assembly instructions and common wear

are also not included in the guarantee..

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude Pro PWS 650 BR 75782 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info