Bedienungsanleitung Gude SPALTY W 370-4T 94698 (Seite 8 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Norwegisch)

624524

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Introduction

To enjoy your new appliance as long as possible, please

read carefully the Operating Instructions and the attached

safety instructions before using it. Further, we recommend

keeping the Operating Instructions to recall the product

features in the future.

Within the continuous product development, we

reserve the right to make technical changes to

improve it.

This document represents translation of the original

Operating Instructions.

Supply includes

Take the appliance out of the transport package and check

it whether there are the following parts:

 1 log splitter

 1 original Operating Instructions

 Warranty Certificate

Please contact your dealer if any parts are missing or are

damaged.

Appliance description (pic. 1)

1. Oil tank

2. Pressure plate

3. Supporting surface

4. Splitting wedge

5. Maneuvering handle

6. Foot

7. Starter

8. Engine

9. Traversing wheel

10. Hydraulic lever

11. Oil drain screw

12. Air vent screw

Technical specifications

Voltage/frequency: 230V~50Hz

Engine output: 1,500 W/(P1, S6 40%)

Protection class: IP 54

Insulation class: B

Idle speed: 2,950 per min

-1

Max. splitting force: 4 tons

Hydraulic oil amount: 2.4 l/SAE 20/HPL 46

Max. hydraulic pressure: 160 bar

Max. splitting force: 230 mm

Min./max. Ø of wood splitting: 50/250 mm

Min./max. wood splitting length: 250/370 mm

Forward movement speed: 0.04 m per second

Backward movement speed: 0.06 m per second

Assembly dimensions LxWxH: 810x270x460 mm

Weight: 38 kg

General instructions

 After unpacking, check all parts for any damage

caused during transport.

 Check whether the shipment is complete.

 Learn the appliance functions through the Operating

Instructions before using it.

 Original accessory equipment and original wearable

and spare parts to be used only.

Appliance to be used with RCD (safety switch

against stray current) 30mA only!

Safety instructions

 Follow all safety and warning instructions on the

appliance and keep them readable.

 The safety equipment on the appliance must not be

disassembled or put out of operation.

 Check the feeder cables. Do not use any defective

feeder cables. See the Plugging section.

 Check whether the two-handed operation works

properly before putting the appliance into operation.

 The operator must be at least 18 years old. Trained

persons must be at least 16 years of age; however,

they only may work when supervised.

 Wear working gloves when operating the appliance.

 Be caution when working: Risk of injury to fingers and

hands by the splitter.

 Use appropriate supporting aids for splitting heavy or

difficult-to-process pieces of wood.

 Any changeover, adjustment, measurement and

cleaning to be performed when the engine is off only.

Unplug the appliance.

 Any installation, repair and servicing of the wiring

system may only be performed by professionals.

 All protective and safety equipment must be

immediately refitted after finishing any repair and

servicing work.

 Switch the engine off after leaving the place of your

work. Unplug the appliance.

 Blocking the two-handed operation and/or bypassing

the adjustment parts of the two-handed operation is

inadmissible as a risk of injury when operating

appliance could arise as a result.

 Any changes to the appliance exclude the liability of

the producer for any consequential damage.

Use as designated

The hydraulic log splitter may only be used in a horizontal

position. Wood may only be split in a horizontal position

along the fibre. The maximum split wood length is 37 cm.

Any other use will be considered a use in conflict with the

designation. The manufacturer will not be liable for any

consequential damage or injuries. Please be sure to know

that our appliances have not been designed for industrial

purposes.

Assembly

For simple packing, the foot (pic. 1/6) and handle (pic.

1/5) are installed by the customer.

For that purpose, use the 2 enclosed M6X16 hex screws

with a nut for the foot and M6x16 socket-head screws with

a nut for the handle. In doing so, put the appliance

horizontally on the floor and support it with the package

polystyrene on the splitting wedge side.

Before operation

 Never split the wood when standing and against the

fibre!

 The safety regulations and regulations applicable for

work and servicing issued by the manufacturer and

dimensions mentioned in the technical specifications

must be followed.

 Applicable safety regulations and other, generally

recognised safety-technical regulations must also be

followed.

 The appliance may only be used, serviced and

repaired by professionals familiarised with and

notified of the risks. Any changes to the appliance

exclude the liability of the manufacturer for any

consequential damage

 The appliance may only be used with the original

accessory equipment and original tools of the

manufacturer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude SPALTY W 370-4T 94698 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info