Bedienungsanleitung Gude TK 2100 55168 (Seite 26 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

624765

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

GTK 2100

Any damaged or disposed electric or

electronic devices must be delivered to

appropriate collection centres.

Protect against humidity

This side up

General instructions for electric

tools

Warning

Read all safety instructions and manuals. Failure to

follow the safety instructions and manuals may result

in electric shock, re and/or serious injuries.

Save all warnings and instructions for future

reference.

The term „electric tools“ used in the safety instruc-

tions refers to electricity-powered tools (including

electric cable) and battery-powered tools (without

electric cable).

1) Safety in the place of work

a) Keep the place of your work clean and well lit.

Mess or an unlit workplace may lead to injuries.

b) Do not work with electric tools in conditions with

ammable liquids, gases or dust. Electric tools

produce sparks able to ignite dust or fumes.

c) Keep children and other persons outside the place

where the electric tools are used. When not con-

centrated, you may lose control over the machine.

2) Electrical safety

a) The plug of an electric tool must strictly corre-

spond to the socket. The plug must not be altered

in any case. Do not use any adapters together with

earthed electric tools. Unaltered plugs and appro-

priate sockets reduce the risk of electric shock.

b) Prevent contact of your body with earthed sur-

faces, such as tubes, heating, cookers and fridges.

There is an increased risk of electric shock if your

body is earthed.

c) Do not expose electric tools to rain and moisture.

Water entered in electric tools increases the risk of

electric shock.

d) Do not use the cable in conict with its designa-

tion, to carry or hang electric tools or to pull the

plug out of socket. Protect the cable against high

temperatures, oil, sharp edges or moving parts

of the machine. Damaged or entangled cables

increase the risk of electric shock.

e) When working with electric tools outdoors, use

extension cables suitable for outdoor use. Using an

extension cable suitable for outdoor use reduces

the risk of electric shock.

f) If operating electric tools in wet conditions cannot

be avoided, use a safety switch against stray

current. Using a safety switch against stray current

reduces the risk of electric shock.

3) Safety of persons

a) Be careful, pay attention to what you are doing and

use common sense when working with electric

tools. Do not use electric tools when you are tired

or under the inuence of drugs, alcohol or phar-

maceuticals. A moment if inattention when using

electric tools may lead to serious injuries.

b) Use personal protective equipment and protective

glasses at all times. Using personal protective

equipment, such as the respirator, non-slip shoes,

protective helmet or ear protectors, depending on

the type and use of electric tools, reduces the risk

of injuries.

c) Prevent the machine from unintentional starting.

Before plugging and/or connecting the machine

to battery, handling or carrying, make sure the

electric tools are switched o. Having a nger on

the switch when carrying the electric tool or when

the machine is on when plugging it may lead to

injuries.

d) Before starting any electric tool, remove any

adjusting wrenches and screwdrivers. A tool or a

wrench present in the rotating part of the machine

may lead to injuries.

e) Avoid any abnormal body posture. Provide good

stability and keep balance at all times. By this,

electric tools are better controlled in unexpected

situations.

f) Wear appropriate clothing. Do not wear loose

clothing and jewels. Keep hair, clothing and gloves

out of rotating parts. Loose clothing, jewels and

long hair may get caught by moving parts.

g) If dust exhausters and catchers are to be installed,

make sure they are tted and used properly. Using

a dust exhauster may reduce the exposure to dust.

4) Use and treatment of electric tools

a) Do not overload the machine. Use appropriate

electric tools for your work. Working with appro-

priate electric tools is better and safer when within

the specied power range.

b) Do not use electric tools with a defective switch.

An electric tool that cannot be switched on or o is

dangerous and must be repaired.

c) Unplug the machine and/or remove the battery

before any machine adjustment, replacement of

accessory equipment and storing the machine.

This safety measure prevents unintentional star-

ting of the electric tool.

d) Keep any electric tool that is not being used out of

reach of children. The machine must not be used

by persons not familiarised with its use and not

having read these Instructions. Electric tools are

dangerous if used by inexperienced persons.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude TK 2100 55168 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info