Bedienungsanleitung Gude V 421 C 85074 (Seite 9 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628819

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

1. In the course of charging, explosive gases develop

abstain from smoking and naked fire or sparks.

The batteries should be charged in well

ventilated spaces. The charger is prohibited for use

inside a vehicle or closed car bonnet.

3. Never charge standard and maintenance-free batteries

jointly.

4. Never recharge disposable batteries.

5. Leave sufficient ventilation space behind the unit.

6. Follow the manufacturer’s instructions.

7. Check ion the right level of the acid Kin battery. .

8. Always check whether condition of the power cable and

clamping cable is perfect. If the power cable is

damaged, have it replaced at a specialist’s.

9. The unit should not be exposed to weather effects –

snow and rain.

10. Do not use the unit bare footed. Do not touch the unit

with wet or damp hands or feet .

11. Never unplug by pulling the cable.

12. Prevent unauthorised persons or children from using the

unit.

Do not leave the switched-on unit unattended, it

could become a source of risk.

• If you do repairs of safety or protection devices, they

should be refit immediately after the job is completed.

• Injuries prevention regulations effective at a place of

particular use and any other generally recognised safety

rules must be known and observed.

• The safety devices should be checked on before the use

of unit. Make sure that even the parts, which are slightly

damaged seemingly, may work properly. .

• Unless otherwise stated in this manual, repairs and

replacement of damaged components and safety

devices should be done at an authorised servicing

centre.

• Have any damaged switches replaced at an authorised

servicing centre.

• This unit complies with any respective safety provisions.

The repairs are allowed to be done by skilled electricians

at authorised servicing centres only. Only genuine spare

parts may be used. A risk of injury is imminent if the

regulation is not observed.

Behaviour in case of emergency

Provide necessary first aid treatment corresponding to the

injury nature and seek qualified medical help as soon as

possible. Protect the injured person from other injuries and

calm him/her down. First aid kit must always be available

in the place of your work in case of accident in

accordance with DIN 13164. Material taken out of the first

aid kit needs to be supplemented right away.

If help is needed, please provide the following details:

1. Place of accident

2. Accident nature

3. Number of injured persons

4. Injury type

Meaning of Symbols

Symbols shown below are used throughout this manual

and/or on the unit:

Product Safety:

Product compliance with

respective EU standards

There is protective insulation on

the unit.

Protection class II

Bans:

General ban (in combination with

another pictograph)

Do not use the unit in rain

Precaution:

Warning/caution Beware of hazardous voltage

Commands:

Read operating manual before use Use protection gloves

Environment Protection:

Wastes to be disposed of in a

professional manner not to harm

the environment.

Cardboard packaging to be

collected for recycling.

Faulty and/or disposed of

electrical/electronic appliances to

be collected by authorised salvage

places.

Packaging:

Protect from moisture Keep Up

Technical Data:

Power connection Weight

Assigned Use

Professional starting charger to charge, quick-acting charging

and vehicle start up. Large wheels enable good travel.

Residual Electrical Hazards

Direct electrical contact

Defective cable one plug may cause an electrical shock

injury.

Have the defective cables and plugs replaced at a

specialist’s. Use the unit on a connection equipped with a

current protection (FI).

Indirect electrical contact

A risk of injury by conductive parts with open or

defective parts of the unit

Disconnect the unit from the source of power to maintain it.

Operate with a current protection only.

Insufficient Lighting of Workplace

Insufficient lighting always present a high safety risk.

Always provide for sufficient lighting when working with the

unit.

Disposal

Disposal instructions are illustrated in the form of pictograms

on the device or packaging. Description of the pictograms is

given in "Identification" chapter.

Disposal of transport packaging

Packaging protects the device against damage during

transport. Packaging materials are usually selected according

to their effect on environment and disposal methods and can

therefore be recycled. Returning of the packaging back to

circulation saves resources and costs for packaging disposal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude V 421 C 85074 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info