Bedienungsanleitung Gude WS 230-2350 R 58109 (Seite 21 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Türkisch)

624895

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH

Additional Safety and Working Instructions

When grinding metal, ying sparks are produced.

Take care that no persons are endangered. Because

of the danger of re, no combustible materials

should be located in the vicinity (spark ight zone).

Do not use dust extraction.

Avoid ying sparks and sanding dust hit your body.

Never reach into the danger area of the machine

when it is running.

Chips and splinters must not be removed while the

machine is running.

Immediately switch o the machine in case of con

siderable vibrations or if other malfunctions occur.

Check the machine in order to nd out the cause.

Do not let any metal parts reach the airing slots -

danger of short circuit!

Under extreme conditions (e.g. smooth-grinding

metals with the arbour and vulcanized bre grinding

wheel), signicant contamination can build up on

the inside of the angle grinder. For safety reasons,

in such conditions the inside should be cleaned

thoroughly of metal deposits and a motor circuit-

breaker must be connected in series. If the motor

circuit-breaker trips the machine must be sent for

repair.

For accessories intended to be tted with threaded

hole wheel, ensure that the thread in the wheel is

long enough to accept the spindle length.

Always use and store the cutting and grinding disks

according to the manufacturer‘s instructions.

Always use the correct guard for cutting and grin

ding.

Always use guard with cutting guide from the acces

sories range for cutting stone.

The adjusting nut must be tightened before starting

to work with the machine.

Always use the auxiliary handle.

The workpiece must be xed if it is not heavy enough

to be steady. Never move the workpiece towards the

rotating disk by hand.

STARTING CURRENT LIMITER

The starting current for the machine is several times

greater than rated current. The starting current

limiter reduces the starting current to such an extent

that a fuse (16 A, slow-blow) is not tripped.

SMOOTH START

Electronic smooth start for save use prevents jerky

run-up of the machine.

Mains Connection

Operation is only allowed with a safety

switch against stray current (RCD max. stray

current of 30mA).

Connect only to single-phase AC system voltage as

indicated on the rating plate. It is also possible to

connect to sockets without an earthing contact as

the design conforms to safety class II.

Only plug-in when machine is switched o.

Maintenance

Unplug the machine before any work on it.

Repairs and works specied in these Instructions may

only be performed by qualied authorised sta.

Use only original accessories and original spare parts.

Keep the device, in particular the air vents, clean at all

times. Never spray water on the device body!

Do not clean the plastics with solvents, ammable or

toxic uids. For cleaning, use a damp cloth only.

Caution! If the power cord of the appliance gets

damaged, it must be replaced by the manufacturer or

its customer service or a similarly qualied person to

avoid danger.

Only a regularly maintained and treated appliance

can serve as a satisfactory aid. Insucient mainte

nance and care can lead to unforeseen accidents and

injuries.

If necessary, a list of spare parts can be found at www.

guede.com.

DEGB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude WS 230-2350 R 58109 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info