EN
Page | 32
Connecting the direct water
drain (see Fig. 6)
1. Remove the screw cap and water
plug on the rear (middle) of the
appliance from the drain hole.
2. Attach the water drain hose to
the connection.
Route the free end of the water
drain hose into a suitable drain or
container into which the condensate
is to drain.
Connecting the floor tray
drain (see Fig. 7)
3. Remove the screw cap and water
plug on the rear (bottom) of the
appliance from the drain hole.
4. Attach the water drain hose to
the connection.
Route the free end of the water
drain hose into a suitable drain or
container into which the condensate
is to drain.
NOTE
If the internal water tank is full, the
appliance automatically switches to
emergency stop. “E2” lights up on
the display.
14 Cleaning the appliance
Clean the mobile air conditioner
according to use and degree of
soiling, but at least every 4 weeks.
Always allow the mobile air
conditioner to cool down completely
before cleaning!
• Clean the ventilation openings
and the filter at regular intervals
(approx. every 2 weeks) to
prevent the performance of the
mobile air conditioner from
deteriorating.
• Wipe down the outside of the
mobile air conditioner with a dry
or slightly damp cloth.
• Then rub the mobile air
conditioner completely dry.
• Remove dust and soiling from
the ventilation openings using a
suitable soft brush.
Cleaning the filter
1. Open and pull out air inlet grille
(12).
2. Clean the filter holder with a
brush or vacuum cleaner.
3. Clean the filter using a neutral
detergent and luke-warm water.
4. Allow the filter to dry.
5. Place the filter onto the air inlet
grille and install the grille in the
appliance again.
