Bedienungsanleitung Gutmann EM 04 - Claro (Seite 12 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

784116

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Safety information

Installation, connection, commissioning

and repair work may only be carried out

by authorised technicians. This techni-

cian will be able to determine suitable

methods for securing the extractor hood

and providing the necessary exhaust air

ducting. The choice of attachment must

take account of the weight of the extrac-

tor hood and the load exerted on the

supporting surface. Note the extraction

values of the dowels supplied. Depend-

ing on the supporting surface, these

have the following values: Dowel Ø10

mm, concrete B25 9.4 kN brick Z20 5.2

KN solid calcium silicate KSV20 4.8 KN.

In the case of unstable supporting sur-

faces, a construction specialist such as

a structural engineer or architect must

be consulted to ensure the extractor

hood is safely installed.

Risk of injury!

The hood body may have sharp edges

resulting from the manufacturing proc-

ess. For this reason, safety gloves must

always be worn when installing it.

Risk of electric shock

The mains voltage must match the de-

tails indicated on the type plate. This

plate is located inside the hood near the

filter. Please only connect the extractor

hood to a properly installed safety

socket. This socket must be easily ac-

cessible after the installation so that the

extractor hood can be disconnected

from the power supply if necessary. If a

fixed connection is used (e.g. if a suit-

able wall socket is not available), the

extractor hood may only be connected

by a qualified electrician. For fixed con-

nections, the extractor hood must be

connected to a single power circuit fitted

with an isolating device. Isolating de-

vices include switches with a contact

gap of at least 3 mm and all-pole

switches, e.g., circuit breakers and con-

tactors. Before working on the electrical

connection of the extractor hood com-

mences, the mains circuit/circuits must

always be switched off. Before drilling

the mounting holes, please make sure

that no electrical cables can be dam-

aged during drilling. The electrical con-

nection must be prepared in such a way

as to allow the easy connection of the

extractor hood. Local regulations must

be observed.

Exhaust air ducting (for extrac-

tion mode)

Exhaust kitchen air must not be fed into

a chimney flue that is also used for the

exhaust air from devices using fuels

(e.g., gas). Official regulations regarding

ducting of exhaust air must be observed.

The exhaust air path must be prepared

in such as way as to allow the easy con-

nection of the extractor hood. The ex-

haust air hose must not have any kinks.

If the extractor hood is operated in ex-

traction mode at the same time as other

room-air-dependent fire appliances

(e.g., wood, gas, oil or coal-fired appli-

ances) in the same room, lethal com-

bustion gases may be directed back into

the room due to the resulting negative

pressure. The operator must therefore

provide a sufficient air supply at all

times. The negative pressure in the

room must not exceed 4 Pa (0.04 mbar).

Solid fuel appliances

The installation of the extractor hood

above solid fuel appliances, which can

pose a fire hazard, (e.g., flying sparks) is

only permissible if the solid fuel appli-

ance is equipped with a sealed, non-

removable cover.

Minimum clearance to hob

The devices are designed for installation

flush with the ceiling. To prevent the

formation of condensation, a non-return

valve must be fitted directly outside the

air outlet. Please note the relevant appli-

cable installation regulations and instal-

lation instructions provided by the manu-

facturer of the gas appliance. The ex-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gutmann EM 04 - Claro Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info