Bedienungsanleitung Gutmann Entrada (Seite 21 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

668871

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Subject to technical modifications!

Transport, unpacking, installation

Condensation may occur if the appliance

is brought into the installation site from a

cold environment. Please wait until the

appliance has adjusted to the temperature

and is completely dry before operating it.

The acclimatization period depends on the

temperature difference and the type and

design of the appliance. However, it should

be at least 12 hours.

Connecting the power supply

Check that the rated voltage indicated on

the appliance matches the mains voltage

in your area. Connection to the incorrect

voltage will damage or destroy the

appliance.

Before switching on the appliance, check

that all cables and lines are properly fitted

and undamaged. Make sure in particular

that there are no kinks in the cables, that

they are not pulled too tightly around corners

and that no objects are resting on them.

Also make sure that all plug connections

are securely inserted. Faulty shielding or

wiring poses a health hazard (electric

shock) and can destroy other appliances.

Appliances with mains plugs are fitted with

a safety-tested mains cable for the

respective country of use and may only be

connected to a correctly earthed safety so-

cket. Otherwise, there is a risk of electric

shock. Make sure that the socket on the

appliance or the domestic safety socket is

easily accessible so that the mains cable

can be unplugged from the socket in an

emergency or during servicing and

maintenance work.

Danger of electric shock!

Do not clean the hood with a steam clea-

ner or water pressure cleaner. The hood

must be disconnected from the power

supply prior to cleaning.

General functionality

The extractor hood has been developed

especially for the extraction of cooking

vapours for use in the private home.The

arised cooking vapours are catched by the

extractor hood and absorbed by the metal

grease filter (version D is add. equipped

with an active carbon filter).

The filters are held in the hood body by

magnets. By some models the filter is

covered by a pane. The accruing extraction

at the edge of the pane (“Perimeter

Extraction”) allows a very effective fume

absorption.The access to the filters is

guaranteed by models using the “Perime-

ter Extraction” method through the swinging

of the pane. The exhaust power is controlled

over the switch panel. Among the lighting

additional options are also controlled over

the switch panel by some extractor

hoods.The illumination of the cooking zone

is taken over by several halogen spotlights.

The extractor hood is produced of stainless

steel or aluminium.

1 Upper chimney

2 Lower chimney

3 Switch panel

4 Metal grease filter

5 Lighting

6 Hood body

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gutmann Entrada Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info