Bedienungsanleitung Gymform ABS-A-Round Pro Platinum (Seite 4 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

764730

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

-4-

• Not to place the belt on your neck, on your chest

or on your back in such a way that electricity passes

through your heart (e.g. an electrode on your chest

and another on your back), genitals, scars, moles,

varicose veins or head).

• Not to place the belt on recent scars, inflamed skin,

infected areas or areas that are susceptible to acne,

thrombosis or other vascular problems (e.g. varicose

veins), or any part of your body with limited sensitivity.

• Do not place on areas with injuries or limited mobility

(e.g. fractures or sprains).

• Not to place the belt directly on metal implants. Place

receivers on the closest muscle.

Possible Adverse Reactions

There have been isolated reports of skin reactions

caused by the use of electro-stimulation devices, in-

cluding allergies, prolonged skin redness and acne.

If any of these symptoms occur, switch off the device

and consult your doctor.

If you have never exercised before or have not exerci-

sed for a long time:

Consult your general practitioner.

Precautions:

• Do not use GYMFORM® ABS-A-ROUND PRO PLA-

TINUM if you are drowsy or asleep.

• Do not use GYMFORM® ABS-A-ROUND PRO PLA-

TINUM if your body is in contact with water.

• Keep out of reach of children.

• Do not use GYMFORM® ABS-A-ROUND PRO

PLATINUM in combination with any other device that

transmits electrical current to your body or with any

other machine.

• Do not connect the metal snap fasteners or electro-

des to any other object.

• Do not modify the device.

• Use only the electrodes supplied by Industex.

• Do not attach two electrodes together.

• If any of the electrodes is not attached properly, you

will notice an itching sensation.

Note:

• The product may malfunction as a result of electrostatic dis-

turbances. If this occurs, simply press the RESET button (16)

to resume normal operation.

COMPONENTS:

-1 detachable GYMFORM® ABS-A-ROUND PRO PLATI-

NUM unit with 9 programmes.

-1 GYMFORM® ABS-A-ROUND PRO PLATINUM belt

- 1 special belt for working the leg and arm muscles

- 6 self-adhesive electrodes (2 of which are double electro-

des)

- 1 instruction manual.

-1 table of fitness targets

- 1 sports bag

- 1 diet booklet

PRODUCT DESCRIPTION (Fig. 1):

1. GYMFORM® ABS-A-ROUND PRO PLATINUM unit

2. Belt: front part - abdominals

3. Belt: back part - obliques

4. Belt: back part - lower back

5. Arm and leg belt

6. Buckles

7. Belt connector

8. LCD display

9. Electrodes for abdominal and lower-back areas

10. ON/OFF button

11. Programme-selection button

12. Button to select belt part

13. Button to increase intensity

14. Button to reduce intensity

15. Adjustable straps

16. RESET button

17. Double electrodes for oblique areas

Putting on the Belt:

Set-up:

Open the battery compartment using a Phillips screwdriver

(not included), remove the battery compartment cover (batte-

ries not included) on the back of the unit (1) and insert three

AAA batteries.

Insert the three batteries in accordance with the polarity

marks. The polarity is indicated on the battery compartment

for proper placement, as shown in the illustration (Fig. 2).

Replace the battery compartment cover and tighten the

screw.

Putting on the Belt:

Attach the GYMFORM® ABS-A-ROUND PRO PLATINUM

unit (1) to the front part (2) of the belt using the six snap

fasteners.

Ensure that they are all well fastened or the belt will not work

properly.

The GYMFORM® ABS-A-ROUND PRO PLATINUM belt

consists of two parts. The front part – abdominals (2), which

works the abdominal muscles, and the back part, which

works the lower-back muscles in the middle and the obliques

at the sides. The two parts are joined using the adjustable

straps (15). The adjustable straps (15) should be inserted

into the buckles (6) and closed using the quick opening and

closing system.

Attach two electrodes (9) to the abdominal part (2) and two

electrodes to the lower-back part (4) of the belt.

Attach the two double electrodes (17) to the two oblique parts

(3).

Make sure the belt connectors (7) between the front part (2)

and the back part are properly connected by ensuring that

the indicated mark on each belt connector (7) is not visible

(Fig. 3).

Remove the protective plastic backing from the belt electro-

des. Do not throw the protective plastic backing away, as you

will need it later.

Attach the two electrodes on the lower-back part of the belt

(4) to the middle of the back, then attach the electrodes on the

oblique part of the belt (3) to the sides.

Note: The obliques are located above the hip bone.

Ensure that all electrodes are properly attached.

Next, attach the electrodes on the front part to the abdominals

(2). Close using the adjustable strap (15). First pass the strap

through the buckle and then fasten it using the quick opening

and closing system.

Carefully adjust the strap on the other side of the front part to

ensure the belt is perfectly attached. Ensure that the belt is

properly adjusted between all parts so that the electrodes are

in contact with the skin.

When you have finished using the belt, to ensure the elec-

trodes do not stick to the skin, remove them one at a time by

Gymform ABS-A-Round Pro Platinum Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info