Bedienungsanleitung Gymform ABS-A-Round Pro (Seite 6 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

764729

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

-6-

ched the electrodes or if the contractions become weak du-

ring the session, it is likely that the batteries need to be re-

placed. Remove them and insert new ones. If this does not

solve the problem, the electrodes have probably reached

the end of their useful life. Switch off the GYMFORM®

ABS-A-ROUND PRO, take it off, fit new electrodes to the

belt and then resume your session. For your convenience,

GYMFORM® ABS-A-ROUND PRO will automatically set

the intensity level to 0 if you change the programme.

NOTE: If the unit does not work properly, press the RESET

button (located on the back of the unit) to restart the unit

and resume normal operation. Press the RESET button

(16) with the tip of a pen or pencil.

TECHNICAL SPECIFICATIONS:

10°C – 40°C Temperature

30%-75% RH (without condensation)

800-1600 hPa

Continuously operating device.

Ingress protection rating: IPX0

Power Supply: 3 1.5 V AAA batteries (not included)

Voltage: 3 x 1.5 V (4.5 V total)

Programme A

Impulse

width (µS)

min.-max.

Frequency

(Hz): min.-

max.

Voltage

(V):

100

290

3120

490/120

5120 10

650

(Mean values at 1 kΩ)

Power: 3 W

Number of channels: 3 channels

The load impedance range for this product is from 500 Ω

to 20 kΩ.

Maximum current of the electrodes supplied: 120 mA (at

500 Ohm).

Dimensions: 92 x 82 x 33 mm (main unit).

Weight: 76 g (main unit without batteries).

This symbol indicates that the device is protected

against electrostatic discharge by BF-type double

insulation.

ISO 7000-1641 User Guide

CLEANING AND MAINTENANCE

DO NOT WASH THE GYMFORM® ABS-A-ROUND PRO

OR THE BELT: WIPE WITH A DRY OR DAMP CLOTH.

Remove the batteries from your GYMFORM® ABS-A-

ROUND PRO if you do not plan to use it for an extended

period of time.

CLEANING AND MAINTENANCE OF ADHESIVE

ELECTRODES

- Clean by wiping with wet fingers.

- Do not immerse in water.

- Keep in a cool, dry place at room temperature.

- Do not remove the insulating label.

- After using the device, always replace the protective plas-

tic backings on the adhesive electrodes.

- Store in the bag supplied.

PRECAUTIONS WITH BATTERIES

Ensure the batteries are properly installed before turning

the unit on.

Turn off the unit to change the batteries.

Remove the batteries if you are not going to use the device

for an extended period of time.

Take the necessary precautions when disposing of the

batteries. Do not expose them to fire.

DISPOSAL OF MATERIALS

A symbol of a crossed-out wheeled bin means

you should find out about and follow local regula-

tions about disposing of this kind of product.

Do not dispose of this product as you would other

household waste. Dispose of this device in accor-

dance with the corresponding local regulations.

Electrical and electronic devices contain hazardous subs-

tances that can have harmful effects on the environment

and/or human health and should be recycled properly.

The battery should be disposed of separately. To protect

the environment, all batteries, including rechargeable

ones, should not be disposed of as you would other hou-

sehold waste. Take them to a disposal centre and ensure

it complies with applicable legislation on battery disposal.

Quality Warranty:

This product is covered by a warranty against manufactu-

ring defects subject to the time periods stipulated by the

legislation in force in each country.

This warranty does not cover damages resulting from in-

adequate use, negligent commercial use, abnormal wear

and tear, accidents or improper handling.

Australia & New Zealand only

This product has the benefit of certain Consumer Guaran-

tees. These are prescribed by the Australian Consumer

Law & the New Zealand Consumer Guarantees Act 1993

both of which provide protection for consumers. There is

no express warranty for this product in Australia or New

Zealand. The above paragraph refers to other countries.

Made in China.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gymform ABS-A-Round Pro Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info