Bedienungsanleitung Gymrex GR-MG39 (Seite 6 von 19) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

779070

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

2. Slide the support column into the base of the

platform and then x it with the screws provided.

Attach the 2 lower handle tubes to the platform base

and tighten.

3. Place the upper parts of the handles on the lower

handle tubes. Screw together. Fix the top of the

left and right handles with 2 screws in the support

column.

4. Connect the wires from the support column to the

wires from the control panel. Place the control panel

on the support column with the wires guiding inside

the column.

By setting the mode with the MODE button, you can

choose:

• manual mode marked as „88”, in which it is possible

to freely set the time and intensity of the training

• automatic mode marked as „P0, P1, ..., P10”

Determining the BMI:

• Press the „MODE” button and select „01” for a man

or „02” for a woman.

• „01-020-00“ will be displayed. 01 means entry into

the BMI program, „020“ means age. Pressing „SPEED

^/˅“ adjusts the displayed value to the user‘s age.

Then press „TIME“ to conrm.

• Then, adjust your height and weight. The default

height and weight are 1.70 m and 70 kg. Pressing

„SPEED ^/˅“ adjusts the displayed values to your

height and weight. Then press „TIME“ to conrm.

• Place your hands on both sensors of the device after

you have entered the data. The BMI will be displayed

within 5 seconds.

Speaker: Connect the player using a dedicated cable (e.g.,

jack-to-jack cable).

3.4. CLEANING AND MAINTENANCE

a) Always unplug the device before cleaning it.

b) Use only non-corrosive cleaners to clean the surface.

c) After cleaning the device, all parts should be dried

completely before using it again.

d) Store the unit in a dry, cool place, free from moisture

and direct exposure to sunlight.

e) Do not spray the device with a water jet or submerge

it in water.

f) Do not allow water to get inside the device through

vents in the housing of the device.

g) The device must be regularly inspected to check its

technical eciency and spot any damage.

h) Use a soft cloth for cleaning.

i) Clean the device after each use.

DISPOSING OF USED DEVICES

Do not dispose of this device in municipal waste systems.

Hand it over to an electric and electrical device recycling

and collection point. Check the symbol on the product,

instruction manual and packaging. The plastics used to

construct the device can be recycled in accordance with

their markings. By choosing to recycle you are making

a signicant contribution to the protection of our

environment.

Contact local authorities for information on your local

recycling facility.

5. Screw the control panel to the support column

by tightening the center screw rst and nally the

side screws. Turn the drink holder into the support

column.

3.3. DEVICE USE

a) Connect the power cable to the back of the device.

b) Plug the cable into an electrical socket.

c) Turn on the power button on the back of the device

(„I“-On position).

d) Stand on the vibrating platform with your legs

spaced at shoulder width and slightly bent knees.

e) Set the selected workout program, start the exercises.

DESCRIPTION OF THE BUTTONS

AUTOMATIC MODES INTENSITY TABLE (PROGRAM/

TIME [MIN])

900S

SELECT THE WORKOUT DURATION 600s

300s

Low

Select the workout intensity: „Low” –

low, „Middle” – medium, „High” – high

Middle

High

START Start the program

STOP Stop the program

MODE Switch between programs:

TIME Dostosowywanie czasu trwania treningu

(maksymalnie 15 minut)

SPEED „˄” Zwiększanie intensywności treningu

SPEED „˅” Zmniejszanie intensywności treningu

3.2. PREPARING FOR USE

APPLIANCE LOCATION

The device should always be used when positioned on an

even, stable, clean, reproof and dry surface, and be out

of the reach of children and persons with limited mental

and sensory functions. Position the device such that you

always have access to the power plug. The power cord

connected to the appliance must be properly grounded

and correspond to the technical details on the product

label.

ASSEMBLING THE APPLIANCE

All screws are xed in the device to avoid mistakes in

their later use. Before installing the element, they must be

screwed out.

1. Lay the base of the platform on a level surface. Pass

the long wire through the center of the support

column and connect it to the base wire. The larger

wire connector should be at the top.

1. Control panel

2. Sensor

3. Right handle

4. Left handle

5. Support column

6. Stretching line

7. Vibrating platform

8. Housing

9. Adjustable feet

10. Power socket

11. „I/O” switch

A. Display MODE

B. Display CAL/BMI

C. Display SPEED

D. Display TIME

E. 300S button

F. 500S button

G. 900S button

H. LOW button

I. MIDDLE button

J. HIGH button

K. MODE button

3. USE GUIDELINES

The device is intended to train various muscle groups

thanks to the use of the vibrations it generates and

appropriate exercises.

The product is intended for home use only!

The user is liable for any damage resulting from

unintended use of the device.

3.1. DEVICE DESCRIPTION

CONTROL PANEL

10 11

L. SPEED “˄” button

M. STOP button

N. START button

O. SPEED “˅” button

P. TIME button

10 11

05.11.2021

Gymrex GR-MG39 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info