665825
12
Zoom out
Zoom in
Vorherige Seite
1/31
Nächste Seite
TF 4R
EN
TROUBLESHOOTING
Symptoms Reasons Solutions
There are sparks between the electrode and the
ller wire.
Metal llings have accumulated on the drive
roller.
Clean the drive roller and the reels with an air-
gun.
Failure to start welding No gas Gas valve closed or bottle empty
The gas is continuous Solenoid valve blocked or dirty Remove, check and clean the solenoid valve.
The torch overheats
The torch is not suitable for the wire feeder duty
cycle
Change the torch for a one which is suitable for
the machine
The welding wire speed is not constant.
The wire skids in the rollers Check the roller pressure or replace it.
Frein de bobine trop serré
Desserrer en agissant sur la vis de frein de la
bobine de l
Covering wire guide in the torch Vérier la torche
incompatible. Vérier la pression des galets
Reel brake too tight Adjust the reel brake
The torch is bent which might inhibit the wire
output
Check the torch
The rollers slide over the wire Check and tighten the roller screws
Sheath crushed Change it
Roller grooves do not match the diameter of
wire used
Change for size suitable for wire used.
MACHINE MAINTENANCE DETAILS
Machine maintenance or alteration should only be carried out by a qualied person. Failure to comply may void the warranty. Any maintenance or
action performed on the machine should be done with power supply off (machine disconnected from the power supply network), wait at least 5
minutes before any operation, block access to the installation if necessary.
Daily :
- Check the torch, the rollers and the tightening, the connections.
Twice a year :
- Clean the inside of the machine with a compressed air cleaner.
- Make sure not to put any conductor inside the machine, such as the torch.
- Check the wear and coupling of the connections, retighten if necessary.
- Check the following parts: electrical, gas, wire reel support, wire-feeding motor and bottle support.
12
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gys TF 4R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info