Bedienungsanleitung Gys MASTER 450 (Seite 4 von 10) (Englisch, Französisch, Italienisch)

665719

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

MASTER 250-350-450

DESCRIPTION

Thank you for choosing our product! To get the best of your equipment, please read carefully the following.

MASTER welders are traditional stick welders for welding in direct current (DC). They can weld rutile, cast-iron, basic

and stainless steel electrodes. They work on a 380V tri-phase power supply.

Before any use, read carefully the user manual and follow the instructions of the manufacturer. If

the item is misused, it can be dangerous for people, animals and buildings in the working environment.

The user remains responsible for the environment and working safety.

POWER SUPPLY – START UP

• These welders have to be plugged on a 3ph 380V socket (50-60Hz) with EARTH. The absorbed effective current (I1)

is shown on the machine, for maximal using conditions. The machine is tted with a bare power cable. The user has

to connect the three phases and the earth. Check if the power supply and its protection (fuse and/or circuit breaker)

are compatibles with the current necessary. The unit must be located in a place where it is easy to access to the plug.

• Start the machine by turning ON the ON/OFF button.

• Connect the earth cable and the electrode holder in the quick plugs on the front of the machine. Respect the polarities

(+/-) indicated on the electrodes packaging.

• Do not use the machine in a wet environment and in an area containing metallic conducting dust and inammable

elements.

USE

1. Ensure the earth clamp is connected to the work piece (as close as possible to the welding area)

2. Select the welding current by adjusting the knob according to the diameter of the electrode to weld. Adjust the

welding current by turning the knob form 1 to 7.

3. Thermal protection : After a long period of welding or intensive use, it is neFssary to wait until the machine cools

down. These machines are protected by a thermostat which will automatically cut out the power to the unit to prevent

damage during an overload.

4. After using the welding unit, turn off the unit switch and unplug the machine.

MAINTENANCE

• Refer all servicing to qualied personnel.

• Disconnect the generator and wait until the ventilator stopped before working on the unit. Inside the device,

voltages and current are dangerous.

• Two or three times a year, remove the steel cover and blow off the dust with compressed air. Let check the electrical

connections (with an insulated tool) and the insulations by qualied personnel.

• Regularly control the state of the supply cable. If this supply cable is damaged, it must be replaced by the

manufacturer, the after sales service or a qualied technician to avoid any danger.

ADVICE

• Respect welding polarities and currents indicated on the electrode packaging

• Remove the electrode from the electrode holder when you do not use it.

• Keep the ventilated parts of the machine clean to allow in/out air circulation.

SECURITE

The arc welding can be dangerous and leads serious injury, may fatal. Protect yourself and protect the others.

Respect the following warnings:

Arc rays Protect yourself thanks to a welding helmet in compliance with EN175 equipped with

lters in compliance with EN 169 or EN 379. Inform and protect by the same means any

people in the welding environment.

Rain, steam, humidity The working environment must be clean (degree of pollution ≤ 3) and protected against

rain. Put the appliance on an even place and at least at one meter from the parts to be

welded. Do not use in rain or snow.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gys MASTER 450 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info