Bedienungsanleitung Gys TIG 208 AC-DC HF (Seite 16 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

665713

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

16/64

Note : The machines’ duty cycle has been tested at room temperature (40°C) and has been determined by

simulation.

MAINTENANCE / ADVICE

• Maintenance should only be carried out by a qualified person.

• Ensure the machine is unplugged, and that the ventilator inside has stopped before carrying out

maintenance work. (DANGER High Voltage and Currents).

• GYS recommends removing the steel cover 2 or 3 times a year to remove any excess dust. Take this

opportunity to have the electrical connections checked by a qualified person with an insulated tool.

• Regularly check the condition of the power supply cord. If damaged, it will need to be replaced by the

manufacturer, its’ after sales service or a qualified person.

• Ensure the ventilation holes of the device are not blocked to allow adequate air circulation.

SAFETY

Arc welding can be dangerous and can cause serious and even fatal injuries.

Protect yourself and others.

Ensure the following safety precautions are taken:

Arc radiations Protect yourself with a helmet fitted with filters in compliance with EN169 or EN

379.

Rain, steam, damp Use your welding unit in a clean/dry environment (pollution factor ≤ 3), on a flat

surface, and more than one meter from the welding work-piece. Do not use in rain

or snow.

Electric shock This device must only be used with an earthed power supply. Do not touch the

parts under tension. Check that the power supply is suitable for this unit.

Falls Do not move the unit over people or objects.

Burns Wear protective (fire-proof) clothing (cotton, overalls or jeans).

Wear protective gloves and a fire-proof apron.

Ensure other people keep a safe distance from the work area and do not look

directly at the welding arc.

Protect others by installing fire-proof protection walls.

Fire risks Remove all flammable products from the work area. Do not work in presence of

flammable gases.

Fumes Do not inhale welding gases and fumes. Use the device in a well ventilated

environment, with artificial extraction if welding indoors.

Additional Any welding operation undertaken in.....

Precautions - rooms where there is an increased risk of electric shocks,

- Poorly ventilated rooms,

- In the presence of flammable or explosive material,

......should always be approved by a "responsible expert", and made in presence of

people trained to intervene in case of emergency.

Technical protection as described in the Technical Specification CEI/IEC 62081

must be implemented.

Welding in raised positions is forbidden, except in case of safety platforms use.

People wearing Pacemakers are advised to see their doctor before using this device.

Do not use the welding unit to unfreeze pipes.

Handle gas bottles with care - there is increased danger if the bottle or its valve are damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gys TIG 208 AC-DC HF Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info