Bedienungsanleitung H.Koenig G2 (Seite 6 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

702010

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

2. If the filter is incorrectly placed, the LED will not lit on and there will be no steam even if

you press the steam button.

Steam Ironing :

1. Fill the tank with tap water as indicated above. For better results, let the filter rest for a few

minutes in a bowl of water.

2. Turn on the appliance, the tank LED will lit on.

3. Use the temperature wheel to choose the correct setting. The temperature LED will lit on

and turn back off when the chosen temperature has been reached. The iron is then ready to

use. The temperature LED will turn on and off during usage, this only ensures the chosen

temperature is maintained at all times. Before usage, let the iron warm up for 3 minutes).

4. Before usage, clean the iron following the below instructions:

Press the steam button for 20 seconds, let it rest for 30 seconds and repeat twice. When the

temperature LED is off, the appliance is ready for usage.

5. After usage, place the iron on its rest pad, set the temperature wheel to "MIN" and turn off

the unit.

6. Remove the water tank and empty it.

Note : It is normal to hear a vibration sound when the steaming starts, this only means there

was air in the filter. Once that air evacuated, the sound will stop.

Dry ironing :

1. Turn on the appliance, the tank LED will lit.

2. Use the temperature wheel to choose the correct setting. The temperature LED will lit on

and turn back off when the chosen temperature has been reached. The iron is then ready to

use. The temperature LED will turn on and off during usage, this only ensures the chosen

temperature is maintained at all times. Before usage, let the iron warm up for 3 minutes).

3. After usage, place the iron on its rest pad, set the temperature wheel to "MIN" and turn off

the unit.

Note : When you change the temperature setting, wait for a few minutes before resuming

ironing to avoid damaging your clothes. Wait for the temperature LED to turn off before

continuing.

Vertical steam ironing :

Follow the same instructions as for normal steam ironing then place the

iron on vertical position within 5 to 15cm of the clothes you wish to iron.

(Fig.6)

This function allows you to iron vertically suspended clothes or curtains.

Never direct the steam to a person or an animal.

Note :

1. Do not fold the supply cable.

2. During vertical ironing, maintain a 90 degree angle and do not use for longer than 2 min at

a time to avoid water leaking.

AUTOLOCKING FUNCTION OF THE STEAM BUTTON

If you need to iron for a long period of time, you can lock the steam button by pressing it backwards.

This will allow a constant steam supply. If you wish to unlock the steam button, you just need to push it

forward.

Note : Please be extremely careful when you have the steam button on a locked position. If you run

out of water, the water tank alarm will go off, you can then unlock the steam button in order to go

ahead and fill in the tank.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

H.Koenig G2 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info