※ Attention before using
1.This machine is set with safety unit, when the handle does not fasten the cover or
the cutter seat is not fastened, the motor cannot turn, so as to ensure safety for the
user.
2.When disassembling or assembling the juicer, press the upper of feed port of the
cover with your hand, then force the handle to slide in or out of cover slot.
3.When disassembling juicing net, first remove the cover and residue barrel, then turn
the middle ring up to 30 degrees by holding juicing nozzle with your hand, and take
up, the juicing net will automatically leave the rotor.
4.In order to avoid damage, before using, first check power supply for compliance with
rated voltage .
5.Clean all parts able to disassemble (refer to the section of "maintenance and
cleaning").
6.When assembling, please carefully read the diagram of "name and position of main
components".
7.Please carefully read the "attentions" before using.
※ Juicing
1.Before using, please confirm the button switch of the main machine in stop state, in
this way, in case assembly is not completed, starting the main machine can be
avoided, so unnecessary damage for persons or property avoided.
2.Before juicing, first confirm juicing net and rotor clutched in position, and no hard
contact between juicing net cutter and transparent cover. Put the transparent cover
on, put the handle into the cover slot, then turn on the machine.
3.For using, assemble according to the diagram of "name and position of main
components". Turn on power supply, press switch to let the machine run no-load for
5 sec. Put prepared vegetable or fruit into feed port of the juicer, press with the
pushing bar, evenly, hard and slowly, juice of the vegetable or fruit can be found,
original, fresh, good for health.
4. Note: when pressing food with the pushing bar, force shall be even or indirect,
pressing force shall not be more than 1 kg, no too sudden force, otherwise, juicing
effect will be reduced.
※ Operating time
This machine is designed with button switch for ON/OFF, the other rotation switch for
speeds choice from 1 grading to 5 grading ( 1 grading for weakest grading, 5 grading
for strongest grading). Suggest to use 1 grading to start machine, then choose a
suitable grading for juicing. For operating time, after operating for 1min, stop for 1min,
then use again. After the above operation is performed for three times, stop for 15 min,
do not operate until the motor is cooled, in this way, service life of this machine will be
prolonged, the machine will serve you more efficiently.
※ Attentions
1. This device is not intended for use by persons with reduced capacity on the
physical, mental or sensory or lack of experience and knowledge (including
children), unless he has them was asked to monitor or if they have had instructions
on the use of the appliance by a person responsible for their safety. Children should
be supervised to ensure they do not play with the device.
