Bedienungsanleitung H.Koenig HKM1032 (Seite 9 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

701177

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

temperature along “-“ direction. If along “+”or “-“ direction continuously could add or reduce temperature.

Temperature adjusting scope: Heating temperature could be selected from 30 to 120 degrees

Centigrade.

tep 3: Blade assembly stirring speed set up

Stirring speed set up: by pressing the SELECT button three times to set up speed, the indicator begin

sparkle, and then by rotating knob to add speed along “+” direction; by rotating knob to reduce speed

along “-“ direction. If along “+”or “-“ direction continuously could add or reduce speed.

Remarks: When blending, adjust speed to 1-5. When do fruit sauce, adjust speed to 5-9.

tep 4: Press “Start/Stop” button

After pressing “Start/Stop” button, you can hear operation voice, the machine begin working

After starting, the set-up time would count down till “00:00”, and the machine would beep when the work

finished. In operation status, press “Start/Stop” again, the machine will stop work.

mportance notes:

1. When don’t choose heating function, if you do not set up time, only set up stirring speed, the machi

so can be started and will be in auto time counting status. The max working time is 20min, in other

words, when the time to 20mins; the machine would stop automatically and beep up.

2, When choose heating function, it’s necessary to set up time and speed, and then start heating or

cooking. If haven’t set up time but set up heating temperature directly, the machine wouldn’t have any

reaction. When heating is finished, i.e. The time countdown come to “00:00”, machine would stop working

with beep .

3, When choose heating function, speed could be set up in max. 5 speed (including 5 speed).

ough pattern:

Use this pattern to make yeast dough or bread dough (LCD display as figure 25)

Operation: by pressing the AUTO button four times to display “Dough”, then press “Start/Stop” button.

This pattern will operation in pre-set program, working in 3 speed for 5 minutes.

Set an example, put 500g flour into stainless steel jar (stainless steel jar should be dry and no water), and

place stainless steel jar into right place. Set up 3 min, press “Dough” button, then press “Start/Stop”

button. Machine would work under pre-set program. Following procedure is putting 300g water slowly

into stainless steel jar (should be finished within one min). Dough would be done well 3min later, getting

out of it.

Remarks: When use dough pattern, stainless steel jar should be dry before put flour to avoid flour sticking

jar in blending process. Flour (for cake) shouldn’t exceed 500g, water shouldn’t exceed 300g, set-up time

shouldn’t exceed 3 min. Proportion between flour and water is 5:3, the effect would be much better if add

Figure

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

H.Koenig HKM1032 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info