701094
24
Zoom out
Zoom in
Vorherige Seite
1/158
Nächste Seite
Troubleshooting
Error Code for Sensors
Error code
Cause
Solution
AUBF
Suction passage blocked
Clean suction passage
AUBN
Dust bin not well located or robot without dust bin
Put back dust bin and place it in position
E1xx
Left collision switch fault
Check sensitivity of the front bumper
E2xx
Right collision switch fault
E3xx
Left and right collision switch fault
E4xx
Left wheel off the ground
Put robot on solid ground
E5xx
Left wheel off the ground, left collision switch fault
Put robot on solid ground and check front
bumper
E6xx
Left wheel off the ground, right collision switch fault
E7xx
Left wheel off the ground, left and right collision
switch fault
E8xx
Right wheel off the ground
Put robot on solid ground
E9xx
Right wheel off the ground, left collision switch fault
Put robot on solid ground and check
sensitivity of the front bumper
Eaxx
Right wheel off the ground, right collision switch fault
Ebxx
Right wheel off the ground, left and right collision
switch fault
Ecxx
Left and right wheel off the ground
Put robot on solid ground
Edxx
Left and right wheel off the ground, left collision
switch fault
Put robot on solid ground and check
sensitivity of the front bumper
Eexx
Left and right wheel off the ground, right collision
switch fault
Efxx
Left and right wheel off the ground, left and right
collision switch fault
Exx1
Left anti-drop sensor detect cliff
Clean bottom anti-drop sensor
Exx2
Front anti-drop sensor detect cliff
Exx3
Left and front anti-drop sensor detect cliff
Clean front sensor lens and bottom anti-
drop sensor lens
Exx4
Right anti-drop sensor detect cliff
Clean bottom anti-drop sensor
Exx5
Left and right anti-drop sensor detect cliff
Exx6
Front and right anti-drop sensor detect cliff
Clean front sensor lens and bottom anti-
drop sensor lens
Exx7
Front, left and right anti-drop sensor detect cliff
Exx8
Front bumper right infrared sensors detect obstacle
Clean front bumper sensor lens
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für H.Koenig SWRC110 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info