Charging attention:
1. Charging: Place the host on the charging station for charging. (During charging, the indicator
light flashes; If charging is over, the light is always on. The charging time is about 5
hours.
Attention： When manual charging, please keep the front bumper of the robot
2cm away from the charging station to ensure the metal contacts connected well
for a successful charging
2. The charging station cannot be used in environments with strong reflection such as direct sunlight
or nearby mirrors. If there is any object with strong reflection, please cover it 7cm from the bottom.
3. In order to ensure the normal working hours of the host, please fully charge it before use. The
charging time is about 5 hours.
4. When charging, do not assemble the water tank assembly to the robot vacuum, so as to ensure the
safety of charging and prevent wet mops from damaging the floor.
5. During the cleaning process, the host can sense that its power is insufficient and automatically
start the recharging mode to find the charging station to recharge. You can also command the host to start
the recharging mode through the recharging button on the remote controller.
PRODUCT USE / START CLEANING
According to different cleaning needs, the product has a variety of cleaning modes to choose from. You
can start
various cleaning modes through a host, remote control or app.
Automatic Cleaning
Setting method: In the shutdown state, press the button for a few seconds. When the
indicator light of the host is on, it indicates that the host is powered on. When the button
on the host is pressed for a short time, or press the automatic cleaning button on the
remote controller, the host starts automatic cleaning.
If it is dustbin instead of water tank installed in the host, and in standby mode or other working
modes, press the button on the remote controller, the host starts automatic cleaning. Press
the button again, the host will switch to powerful suction mode. Press the button once
more, the host will switch to quiet cleaning mode. Pressing the button additionally more
times will make the host switch between powerful suction mode and quiet cleaning mode
circularly.
If the water tank is installed in the host, and in standby or other working modes, pressing the
button will always make the host enter into mopping mode.
