d. In the working status, the robot will return to charging station automatically and LED panel will show
“ ” when battery power is low .
For extending battery life:
a. Before first use, charge the robot for 12 hours.
b. Charge the robot as soon as battery power is low.
c. The robot will return to charging station automatically when it accomplishes cleaning or battery
power is low.
d. If the robot is not to be used for a long time, fully charge the battery before use, turn the power off,
remove and store it in a cool, dry place.
e. If the robot is not to be used for more than 3 months, charge the robot for 12 hours, turn the power
off, remove and store it in a cool, dry place.
2. Starting up / Standby / Sleeping / Power off
A. Starting up
a. Make sure the power switch is on.
b. In standby mode, press “ ” on main body or ON/OFF on remote control to start cleaning.
Note: If robot is in sleep mode, press “ ” on main body or ON/OFF on remote control to wake
up the robot from sleep mode, then press “ ” again, the robot will start cleaning automatically.
B. Standby
Standby means robot has its power switched on, waiting for the user’s operation. It can be changed
to standby mode by one of the following methods:
a. During robot cleaning, press “ ” on main body to enter standby mode.
b. During robot cleaning, press ON/OFF button on remote control to power off the robot.
C. Sleep
In sleep mode, the robot can only be waken up from “ ” button on main body or ON/OFF on
remote control. In order to save power, you can turn the robot into sleep mode from standby mode
via either of the following methods:
a. Press “ ” on main body and hold it for 3 seconds.
b. Robot will automatically enter sleep mode if no command is received for more than 60 seconds.
