Bedienungsanleitung H.Koenig V32 (Seite 7 von 38) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

701977

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

How to get a professional ironing finish

A normal iron generates only a small quantity of steam. In this case it is necessary to products

steam constantly in order to eliminate crease in the fabric being ironed.

A professional ironing system works rather differently. The fabric is first made damp by the steam

and then, in a second phase, dry-ironed in the normal way. This means that every. Tiniest crease

is removed and your garments are ironed to perfection.

In the first phase (steam-damping of the fabric),hold the iron about 20 cm above the fabric and

press the steam(2). Pass the iron over the garment in a circular movement so that the powerful jet

of steam damps the fabric. Lightly creased garments require only a few moments of steaming.

While very heavy fabrics or garments with particularly difficult creases must be damper, so steam

must be applied for a few seconds more.

During the second phase (dry ironing), check that the thermostat knob is in the correct position

for the type of fabrics; dry-iron the garment. The special ironing plate will prevent the fabrics from

becoming shiny. Using this ironing technique, and following the suggestions in the chart below,

you will find it easy to give your garments a really professional ironing finish.

Guide to perfect ironing

Type of

fabric

Position of

thermostat

knob

Ironing instructions

Acetate

Acrylic

Nylon

Dry ironing

Follow the instructions on the label of the garment.

This type of fabric generally requires very light ironing.

Pollester

Rayon

Dry ironing

Iron inside out. When ironing mixed fabrics. Select the

Lowest recommended temperature.

Silk

Dry ironing

Iron inside out.

Wool

Light cotton

Light linen

Steam ironing

Iron inside out. Place a thin cloth over the fabric in order to

avoid a shiny finish

Cotton

Fine linen

Starched

fabrics

Steam ironing

Dampen the fabric before ironing. Heavier fabrics and

tarched fabrics can be ironed on the front; darker colours

and embroidered garments should be ironed inside out.

Linen

Steam ironing

Use plenty of steam and iron dark fabrics inside out in order

to avoid a shiny finish, Iron lapels and cuffs on the right side

for better finish.

ENVIRONMENT

CAUTION:

Do not dispose of this product as it has with other household products. There is a separation of this waste

product into communities, you will need to inform your local authorities about the places where you can

return this product. In fact, electrical and electronic products contain hazardous substances that have harmful

effects on the environment or human health and should be recycled. The symbol here indicates that electrical and

electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.

Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France

www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 0 0 05

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

H.Koenig V32 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info